The Future of Photonics, Electronics, and Additive Manufacturing

| December 10, 2019
THE FUTURE OF PHOTONICS, ELECTRONICS, AND ADDITIVE MANUFACTURING
Photonics and electronics has already been converging in the research community for decades. Thanks to fundamental engineers like Richard Soref and large semiconductor manufacturers, silicon photonics manufacturing capacity is nearly ready to scale in order to accommodate new design methodologies. The future of photonics can't be considered in isolation as electronic circuits will still be fundamental.

Spotlight

Bricking Solutions, Inc.

Bricking Solutions is the world’s leading manufacturer of refractory maintenance products. Since 1967 the company has developed custom aluminum solutions for the cement and lime industry , as well as a variety of maintenance solutions for special assignments and projects worldwide.

OTHER ARTICLES

How to Overcome the Additive Manufacturing Challenges in Aerospace

Article | December 6, 2021

Aerospace manufacturing and design are getting advanced with additive manufacturing. However, the limitations of traditional manufacturing techniques sometimes make it incompetent to produce technologically oriented products. Additive Manufacturing (AM)helps the aircraft system run more efficiently by creating lightweight aircraft parts. This is one of the reasons that additive manufacturing is gaining traction in aerospace and other industries. According to recent analysis and data, the global additive manufacturing market is expected to grow from USD 9.52 billion in 2020 to USD 27.91 billion in 2028. The expanding technologies and materials used in additive manufacturing will indeed stimulate industry growth shortly. It’s important to note that there isn’t one channel that is the silver bullet. Most of the time, a combination of different channels will help drive a more powerful outcome.” – Wendy Lee, Director of Marketing at Blue Prism However, the aerospace industry encounters some challenges with additive manufacturing, which is the focus of this article. Scalability, multi-material capabilities, professional workers, high-cost materials, and quality compliance norms are all constraints that aerospace professionals are dealing with. Here we will discuss the top three challenges of additive manufacturing in aerospace and their solutions. Future of Additive Manufacturing in the Aerospace Industry Even though additive manufacturing has been around for a while, it has only lately become advanced enough to be used in the aerospace sector. In the aerospace business, additive manufacturing has the potential to deliver significant benefits. Cost savings, design freedom, weight reduction, shorter time to market, fewer waste materials, better efficiency, and on-demand production are just some of the benefits. Although additive manufacturing cannot make every part, it provides an exciting opportunity to explore feasible alternatives, either supplementing or replacing traditional manufacturing processes. However, it must be taken into account early in the development phase. Additionally, knowledge must be embedded in aircraft design teams to ensure the successful use of additive manufacturing. However, in recent years, AM has become more prevalent in end-to-end manufacturing. According to Deloitte University Press, the future of AM in aerospace may include: Directly embedding additively produced electronics Wings printing 3D printing engine parts Making battlefield repair components Top 3 Additive Manufacturing Challenges in the Aerospace Industry and Solutions While problems are inherent in any new technology, experts overcome them by identifying solutions. Let's look at the top three challenges that the aerospace industry is currently facing and the solutions to overcome them. Lack of Qualified Experts Using 3D printers in production and automating work processes are skills that are lacking. However, the obstacles are natural, and the skilled manufacturing workforce is aging and reluctant to adapt to new design models. This is creating the skills gaps surrounding manipulating AM technology. How to Overcome Less time spent educating employees is better for business. For example, the US National Additive Manufacturing Institute and the European ADMIRE initiative offer accelerated courses via remote learning websites. Of course, you'll need to provide numerous additive manufacturing opportunities to attract the key technologists, either on-site or off-site. They will oversee new hires' activities and help them translate their knowledge of 3D printing into designs and final items. Over Budget Material The typical cost of AM equipment is $300,000. Industrial consumables cost between $100 and $150 per item (although the final price is formed after choosing the material; plastic, for example, is the most budget-friendly option). How to Overcome To overcome this obstacle, you must plan a long-term implementation strategy based on the manufacturing-as-a-service model. On-demand manufacturing reduces manufacturing costs and speeds up product development. You can also go with cheap 3D printers that use cheap welding wire that hasjust come onto the market. They cost $1,200 and may suit your needs. Fresh Quality Compliance Guidelines As 3D printing and CNC manufacturing technologies constantly evolve, there are no established norms or regulations for 3D printed objects. However, 3D printed solutions do not always match traditional quality, durability, and strength. For example, a 3D-printed mechanical part. Can someone order 500 similar parts a few months later? Consistency standards and product post-processing may have a negative impact in such circumstances. So, in such a case, traditional manufacturing wins over 3D printing. How to Overcome You might endeavor to set quality criteria for your 3D-printed products to ensure they are comparable to traditional ones. You can also apply the ANSI AMSC and America Makes standards, which define quality criteria for 3D printed products. How Boeing Applies Additive Manufacturing Technology? Boeing is focusing its efforts on leveraging and speeding up additive manufacturing to transform its manufacturing system and support its growth. The company operates 20 additive manufacturing facilities worldwide and collaborates with vendors to supply 3D-printed components for its commercial, space, and defense platforms. Boeing is now designing missiles, helicopters, and airplanes using 3D printing technology. A small internal team contributes roughly 1,000 3D-printed components to the company's flight projects. Boeing claims that addressing design as an "integrated mechanical system" considerably improves manufacturability and lowers costs. Final Words Additive manufacturing is altering the way the aerospace industry designs and manufactures aircraft parts. Aerospace advanced manufacturing is making aircraft production easier. We've explored solutions to some of the snags that you may encounter. However, other concerns, such as limited multi-material capabilities and size constraints, require solutions, and industry specialists are working on them. Despite these challenges, additive manufacturing is still booming and rocking in a variety of industries. FAQ Why is additive manufacturing used in Aerospace? It allows the industry to build quality parts quickly and inexpensively. Reduce waste and build parts for aircraft that are difficult to manufacture using existing methods. How does additive manufacturing help in Aerospace applications? Environmental control system (ECS) ducting, custom cosmetic aircraft interior components, rocket engine components, combustor liners, composite tooling, oil and fuel tanks, and UAV components are examples of typical applications. 3D printing helps in producing solid, complicated pieces with ease. Which aerospace firms use additive manufacturing/3D printing? Boeing and Airbus are two of the many aircraft businesses that use additive-created parts in their planes. Boeing incorporates additive manufacturing (AM) components into both commercial and military aircraft. Airbus also employs AM metal braces and bleed pipes on the A320neo and A350 XWB aircraft. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{ "@type": "Question", "name": "Why is additive manufacturing used in Aerospace?", "acceptedAnswer": { "@type": "Answer", "text": "It allows the industry to build quality parts quickly and inexpensively. Reduce waste and build parts for aircraft that are difficult to manufacture using existing methods." } },{ "@type": "Question", "name": "How does additive manufacturing help in Aerospace applications?", "acceptedAnswer": { "@type": "Answer", "text": "Environmental control system (ECS) ducting, custom cosmetic aircraft interior components, rocket engine components, combustor liners, composite tooling, oil and fuel tanks, and UAV components are examples of typical applications. 3D printing helps in producing solid, complicated pieces with ease." } },{ "@type": "Question", "name": "Which aerospace firms use additive manufacturing/3D printing?", "acceptedAnswer": { "@type": "Answer", "text": "Boeing and Airbus are two of the many aircraft businesses that use additive-created parts in their planes. Boeing incorporates additive manufacturing (AM) components into both commercial and military aircraft. Airbus also employs AM metal braces and bleed pipes on the A320neo and A350 XWB aircraft." } }] }

Read More

IoT in Manufacturing: How It's Changing the Way We Do Business

Article | December 10, 2021

IoT in the manufacturing industry introduces a superior technology that is coming up as a blessing for the industry. Manufacturers are enjoying one-of-a-kind benefits and returns on their reinvestments in IoT. Benefits such as enhanced productivity, work safety, reduced downtime, cost-effective operations, and more such benefits of IoT in manufacturing make it more and more popular with each passing day. The global IoT market is estimated to reach a value of USD 1,386.06 billion by 2026 from USD 761.4 billion in 2020 at a CAGR of 10.53 percent over the forecast period of 2021-2026. So the whole worldwide market of IoT has a bright future in the following years. “As technology takes over and enhances many of the processes we used to handle with manual labor, we are freed up to use our minds creatively, which leads to bigger and better leaps in innovation and productivity.” – Matt Mong, VP Market Innovation and Project Business Evangelist at Adeaca Let’s check out below some exciting facts about IoT in manufacturing and see how IoT makes a difference in the manufacturing industry. IoT in Manufacturing: Some Interesting Facts According to PwC, 91% of industrial/manufacturing enterprises in Germany invest in "digital factories" that use IoT solutions. According to the International Federation of Robotics (IFR), China employs more industrial robots than any other country (many of which are connected to the internet in some way). According to IoT Analytics, the industrial sector spent more than $64 billion on IoT in 2018 and expects investment in Industry 4.0 to reach $310 billion by 2023. According to the Eclipse Foundation, most IoT developers are focused on developing smart agriculture systems (26%), while industrial automation is another big focus area (26%). However, home automation is dwindling in popularity, accounting for just 19% of projects. How Does IoT Work for the Manufacturing Industry? The Internet of Things (IoT) is a network of interconnected devices that communicate with one another and with other networks. While IoT-enabled devices are capable of various tasks, they are primarily employed to collect data and carry out specific tasks. The implementation of the Internet of Things in manufacturing is often referred to as the IIoT, or Industrial Internet of Things. IoT makes use of 'smart' devices to collect, process, and act on data. These intelligent devices are equipped with sensors and other software that enable them to communicate and exchange data inside the network. IoT-enabled equipment gives crucial real-time data that enables manufacturers or machine operators to make informed decisions. So, how does it function in practice? Sensors capture data from the system and transfer it to the cloud, where it can be analyzed. The data is transferred to the quality assurance system. The data that has been analyzed is forwarded to the end-user. How the IoT is Improving Manufacturing Business Operations The Internet of Things (IoT) has numerous benefits for the manufacturing industry. We'll go over some of the significant benefits that the Internet of Things brings to the manufacturing business. Energy Efficiency Solutions Energy is a high cost in manufacturing. Unfortunately, the current industrial energy infrastructure can only track excessive energy consumption. The utility bills include the factory's energy consumption records. But, unfortunately, nobody can break down energy consumption to the device level and find out the underperforming pieces. Some energy usage monitoring tools exist, but they only provide partial data, making system analysis difficult. IoT can help by giving device-level energy data. The sensors will detect any underperforming devices in the network and alert you so you can take action. As a result, the technology can help you reduce energy waste and find other ways to save it. Market Forecasting Data is required to determine trends and quality of production at a manufacturing facility. It also helps manufacturers plan and anticipates changes. These forecasts can help with inventory management, employment, cost control, and other operational procedures. Thus, IoT technology makes it easier to foresee and optimize customer requirements. Proactive Maintenance The Internet of Things (IoT) uses sensors to gather data about assets' health and productivity. In addition, it uses advanced analytics to give actionable information. These are presented on an appealing dashboard connected to your smart device. This allows for predictive maintenance to be used in the manufacturing industry. Superior Product Quality Every manufacturer is determined to produce a high-quality product at a low cost. Therefore, a minor quality modification can have a significant influence on the manufacturing firm. Customer happiness, waste reduction, sales, and profit can all benefit from high-quality products. But making high-quality products isn't easy. The Internet of Things (IoT) can assist you in this endeavor. Poorly set, calibrated, and maintained equipment are some of the main reasons for low-quality products. Worst of all, many small things sometimes go ignored as the final product seems perfect. Quality tests show the product is fine, but your consumers start having problems after a couple of months. Imagine the resources needed to identify and correct the problem. Sensors in an IoT network detect even minimal tweaks in setup and alert operators. The team might momentarily stop production to address the issue before the production cycle gets complete. Rapid and Informed Decision-Making The IoT can dramatically improve organizational decision-making. It unlocks vital data about network equipment performance and delivers it to the right person. Managers and field operators can use this data to improve plant processes and overall production. In addition to these significant benefits, IoT in manufacturing can help manufacturers improve their manufacturing operations and construct a unit that meets the vision of the smart factory of 2040. The future beyond IoT would be the icing on the cake for all of us, as technology has always amazed us. Imagine the day when IoT and AI merge, and the virtual gadgets controlled by IoT are the next major milestone. Then, the ideal combination of robotics, AI, and VR may reduce the manufacturing plant size and cost while increasing the output to a level that is unimaginable and unattainable as of now. Airbus Improved Production Efficiency with Its Factory of the Future Concept It's a massive task for a commercial airliner to be assembled. The expense of making a mistake throughout making such a craft can be significant, as there are millions of parts and thousands of assembly phases. Airbus has established a digital manufacturing effort called Factory of the Future to optimize operations and increase production capacity. The company has installed sensors on factory floor tools and machinery and supplied workers with wearable technologies, such as industrial smart glasses, to reduce errors and improve workplace safety. The wearable allowed for a 500% increase in efficiency while eliminating nearly all mistakes in one process named cabin seat marking. Final Words While the benefits of IoT devices have long been a topic of discussion among technology enthusiasts, the incorporation of IoT in manufacturing is creating a new buzz in the industry. The benefits of IoT in manufacturing, such as remote analysis of operations, processes, and products, are assisting manufacturers in establishing a more productive manufacturing unit. As a result of these benefits, IoT use in manufacturing is accelerating. Recognize the IoT's potential and take a step toward incorporating it into your manufacturing operation in 2022. FAQ What is the Industrial Internet of Things (IIoT)? IIoT stands for Industrial Internet of Things. It uses data to improve industrial efficiency. To enhance industrial performance, it uses embedded sensors, cloud data, and connected devices. Why is the IoT changing manufacturing? Real-time monitoring of machines and accurate reporting for better decisions are possible through IoT. This improves business strategies and project control. Thus, the Internet of Things has a significant impact on the profitability of any manufacturing company. How does the IoT transform the way we do business? We can use data collected by IoT devices to improve efficiency and help organizations make better decisions. They tell organizations the truth, not what they hope or believe. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{ "@type": "Question", "name": "What is the Industrial Internet of Things (IIoT)?", "acceptedAnswer": { "@type": "Answer", "text": "IIoT stands for Industrial Internet of Things. It uses data to improve industrial efficiency. To enhance industrial performance, it uses embedded sensors, cloud data, and connected devices." } },{ "@type": "Question", "name": "Why is the IoT changing manufacturing?", "acceptedAnswer": { "@type": "Answer", "text": "Real-time monitoring of machines and accurate reporting for better decisions are possible through IoT. This improves business strategies and project control. Thus, the Internet of Things has a significant impact on the profitability of any manufacturing company." } },{ "@type": "Question", "name": "How does the IoT transform the way we do business?", "acceptedAnswer": { "@type": "Answer", "text": "We can use data collected by IoT devices to improve efficiency and help organizations make better decisions. They tell organizations the truth, not what they hope or believe." } }] }

Read More

Technologies That Will Keep You Ahead in the Manufacturing Realm

Article | November 20, 2021

Modern manufacturing methods are pioneering and adopting manufacturing industry advancements. To remain competitive in the present era and provide the most excellent industry solutions to your organization and target customer group in 2022, you must employ new manufacturing technologies in your manufacturing processes. Additionally, embracing current technologies is the ideal approach to tackle the industry's current challenges such as workplace safety, digitalization of operations, and a lack of skilled workers. This article will discuss some of the leading manufacturing technologies that transform traditional manufacturing facilities into smart manufacturing factories. So, let us begin. Manufacturing Technology & Innovations for 2022 To better understand industry 4.0, let's look at some of the manufacturing technologies that will dominate the manufacturing industry in 2022. 3D Printing Numerous industries, including aerospace, healthcare, electronics, and architecture, utilize 3D printing in manufacturing. It is the most widely used technology across industries and will remain so in 2022 and in the years to come. We may also anticipate more advancements in this technology to help overcome current barriers to 3D printing adoption, including equipment costs, material constraints, lengthier manufacturing times, a lack of knowledge, and legal issues. Additionally, it would assist manufacturers in overcoming current manufacturing challenges such as increasing product demand, increasing automation, and locating and retaining the workforce in manufacturing plants. It is vital to incorporate 3D technology into production processes to achieve greater precision and accuracy in manufacturing. IoT The Internet of Things is a critical component of the industry 4.0 revolution. It has altered the environment of data collection and analysis across sectors. For example, the Internet of Things is assisting manufacturers in better understanding manufacturing and supply chain operations, forecasting product demand, and boosting customer experiences. Implementing IoT in your manufacturing plant will also help you avoid production delays and increase the performance of your production lines. Additionally, it will decrease equipment downtime and improve process efficiency. It also enhances worker safety and enables more effective labor management. To begin implementing IoT in your manufacturing plant, you must first examine your manufacturing processes and research how other organizations have implemented IoT in their manufacturing processes or products. This method will assist you in determining the optimal location to begin integrating the IoT in your manufacturing plants and transforming them into smart ones. “Once you start to look at yourself in the right way and realize that projects are at the core of your business, it is easy to see how you should use technology to support your business.” – Matt Mong, VP of Market Innovation and Project Business Evangelist at Adeaca. GD & T The model created in the CAD program for any product is not exactly replicated with the exact dimensions during the production procedures. Thus, manufacturers or engineers utilize GD&T (Geometric Dimension &Tolerancing) to manage and communicate the permissible variation within a product assembly to manufacturing partners and inspectors. GD&T is a programming language that enables developers and inspectors to optimize functionality without incurring additional costs. The primary advantage of GD&T is that it expresses the design intent rather than the final geometry. However, as with a vector or formula, it is a representation of the actual item. AR & VR The two primary transformation aspects in the industry 4.0notion are augmented reality (AR) and virtual reality (VR). AR technology in manufacturing enables firms to operate more efficiently by reducing production time. Additionally, it discovers and resolves manufacturing process difficulties. Virtual reality technology benefits the industrial business in a variety of ways. It enables product designers to mimic their prototypes or models using powerful virtual reality software. This enables them to correct faults at the first stage of production and minimize production time and cost. Additionally, the technology provides additional benefits, such as increased workplace productivity and safety. ERP Enterprise Resource Planning (ERP) refers to a comprehensive end-to-end software solution that is used across sectors. It assists the manufacturing business in successfully maintaining production processes and other operational data by avoiding numerous roadblocks along the way. ERP technology enables enterprises to improve process efficiency and product quality by tackling industry-specific difficulties such as insufficient data, operation integration, inventory control, supply chain management, and on-time delivery. Discover How John Deere Manufactured Their Tractors Using Cutting-edge Technologies John Deere is a significant firm that embraces innovation and the Internet of Things. The company integrates Internet of Things sensors, wireless communication, and intelligent land management systems. It further integrates IoT tools into its manufacturing process, bridging the gap between technologies. Additionally, the company is a pioneer in GPS technology. Its most modern technology, which it incorporates into tractors, is accurate to within two centimeters. Additionally, the organization has implemented telemetry technology for predictive maintenance. Final Words Manufacturing innovations are assisting manufacturers in modernizing their traditional manufacturing processes. Modern manufacturing is equipped with modern technologies that aim to improve the processes and goods, increasing the manufacturers' commercial revenues. So, to remain competitive in this age of technological innovation, manufacturers must update their manufacturing processes to remain relevant in today's manufacturing world. FAQ What is manufacturing innovation? Manufacturing innovation includes new technology, supply chain modifications, and product and process improvements. As a result, businesses can benefit significantly from innovation and typically surpass their competitors. Which technologies are considered to be a component of advanced manufacturing? 3–D printing, robotics, IoT, nanotechnology, cloud computing, robotics, and big data are the significant components of advanced manufacturing. How are cutting-edge technologies assisting the manufacturing sector? The cutting-edge technology can precisely estimate demand to set production objectives, analyze machine data to predict when parts will break before a human operator can detect, and more. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{ "@type": "Question", "name": "What is manufacturing innovation?", "acceptedAnswer": { "@type": "Answer", "text": "Manufacturing innovation includes new technology, supply chain modifications, and product and process improvements. As a result, businesses can benefit significantly from innovation and typically surpass their competitors." } },{ "@type": "Question", "name": "Which technologies are considered to be a component of advanced manufacturing?", "acceptedAnswer": { "@type": "Answer", "text": "3–D printing, robotics, IoT, nanotechnology, cloud computing, robotics, and big data are the significant components of advanced manufacturing." } },{ "@type": "Question", "name": "How are cutting-edge technologies assisting the manufacturing sector?", "acceptedAnswer": { "@type": "Answer", "text": "The cutting-edge technology can precisely estimate demand to set production objectives, analyze machine data to predict when parts will break before a human operator can detect, and more." } }] }

Read More

Wireless AGVs May Prove Most Important ProMatDX Innovation

Article | April 1, 2021

April 12 -15 ProMatDX, the largest material handling event, will take place virtually. It will feature dozens of AGV vendors. Sadly, some of these highly innovating products still need to be plugged-in to capture power. No more. Wiferion in process charging eliminates the plug-in charging making AGVs truly autonomous. In process charging eliminates the waste of AGV downtime – the fleet is always working AND charging. In process charging is safe ensuring the OSHA, ergonomics, and danger to workers significantly reduced. In process charging is cost-efficient because full vehicle deployment means a reduced fleet count ensuring a rapid ROI. For OEMs of AGVs and industrial trucks implementing inductive charging technology solves the wear and tear issues caused by conventional charging methods as well as making vehicles fully autonomous. For end-users of AGVs and industrial trucks, inductive charging in combination with lithium batteries can improve fleet availability by more than 30%. Whether driverless transport systems (AGVs), electric forklifts, or mobile robots (AMRs), the efficient use of industrial trucks is a decisive factor for competitiveness during ever- increasing cost pressures. The energy systems are being scrutinized and lithium-ion batteries are the preferred technology. The advantages versus lead-acid batteries (including the ability to recharge faster and more often) are obvious. Until now the full potential of storage technology has not been fully realized.

Read More

Spotlight

Bricking Solutions, Inc.

Bricking Solutions is the world’s leading manufacturer of refractory maintenance products. Since 1967 the company has developed custom aluminum solutions for the cement and lime industry , as well as a variety of maintenance solutions for special assignments and projects worldwide.

Events