Manufacturing the Future the Next Era of Globalization with 3d Printing

whitePaper | April 25, 2022

In the late 18th century, the first industrial revolution transformed hand production methods into steam machines. The second industrial revolution which occurred at the end of the 19th century revolutionized communication and transport methods with the telegraph and railway. The third revolution brought computing power to manufacturing processes in the second half of the 20th century.

whitePaper | July 16, 2020

Quality control testing instrumentation solutions for GMP manufacturing. From raw materials QC through production QC and final product QC.Purified Water is used to produce nonparenteral preparations and other pharma applications, including tests/assays for which water is indicated. SOP parameters can be pre-programmed into the instrument and automated for testing to meet EP 2.2.44 Total Organic Carbon, USP<645> Water Conductivity, USP <643> Total Organic Carbon Analysis, and International Conference on Harmonisation (ICH) Q2 standards.

whitePaper | July 8, 2022

In response to increasing demand by the investment community over the last dozen years, the Securities and Exchange Commission (SEC) has published guidance calling for greater disclosure by public companies of the risks and costs of climate change on their businesses. The SEC’s efforts to promote greater transparency on corporate environmental impact culminated on March 21, 2022, with the promulgation of a proposed rule setting forth a sweeping array of new requirements for detailed disclosure of those risks and costs, with particular attention to greenhouse gas (GHG) emissions. If adopted, the rule would impose on publicly-held manufacturers significant obligations not only to make these disclosures but also to establish an extensive system of disclosure and accounting controls needed to ensure the periodic capture, assessment, and dissemination of a company’s exposure to climate-related risk and impact on the environment. Appropriate maintenance of any such system would require rigorous assessment of the adequacy of design and operating effectiveness of those controls.

whitePaper | December 13, 2019

Winsun has a 3D construction printer installed in their factory in Suzhou, China, that produces elements by 3D printing. The elements are then transported to and assembled at the building site to form the building structure. Hence, Winsun is actually 3D printing precast elements and do not 3D print on the building site. Therefore, when Winsun claimed to have done 10 buildings in 10 days, it actually meant, that they assembled 10 buildings in 10 days, out of elements 3D printed in the factory long before.

whitePaper | October 21, 2022

The adoption of Industry 4.0 technologies into production facilities and throughout operations, such as automation, 3D printers, cloud computing, robotics, machine learning, and IIoT devices, is gaining momentum across smart manufacturing

whitePaper | February 23, 2022

Fully automated assembly lines with industrial robots are highly efficient, fast and precise – as long as they are in operation. When unplanned downtimes occur, the economic damage can be immense within just a matter of minutes. Prevention is better than repair. Using high-performance lubricants during regular maintenance of industrial robots prevents unscheduled downtimes, optimizes the robotics and maximizes the uptime of the assembly line. In this white paper, you will learn more about the right lubrication for your industrial robots.