Article | December 30, 2021
Risk management in manufacturing has always been a top priority for manufacturers to avoid any unfortunate incidents. As a result, it is possible to create a more secure work environment for employees by conducting risk assessments and implementing remedies.
“If you don’t invest in risk management, it doesn’t matter what business you’re in, it’s a risky business.”
– Gary Cohn, an American Business Leader.
As of 2019, the worldwide risk management market was valued at $7.39 billion, and it is expected to rise at a CAGR of 18.7% from 2020 to 2027, according to allied market research.
Why is Risk Assessment Critical in Manufacturing?
The manufacturing industry must have a credible risk assessment and management plan to defend itself from any breaches. Risk assessment helps firms understand the dangers they face and their implications if their systems are compromised. Hence, risk assessment is very critical in the manufacturing industry.
Five Risk Assessment Principles
Identify hazards/risks - Employers must examine their workers' health and safety risks. Therefore, an organization must regularly inspect its employee’s physical, mental, chemical, and biological threats.
Identify who may be hurt and in what way – Identifying the personnel both full-time and part-time at-risk. Employers must also examine threats to agency and contract personnel, visitors, clients, and other visitors.
Assess the risks and act accordingly - Employers must assess the likelihood of each danger causing injury. This will evaluate and lower the chance at the working space. Even with all safeguards, there is always some danger. Therefore, employers must assess if danger is still high, medium, or low risk.
Get the Risks Documented - Employers with five or more employees must record the critical findings of the risk assessment in writing. In addition, register any risks identified in the risk assessment and actions to minimize or eliminate risk.
This document confirms the evaluation and is used to examine working practices afterward. The risk assessment is a draft. It should be readable. It shouldn't be hidden away. The risk assessment must account for changes in working techniques, new machinery, or higher work objectives.
5 Manufacturing Risks to Consider in 2022
Accidents at Work
Even if official safety policies and programs are designed, followed, and enhanced, manufacturers may endure workplace accidents and injuries. Risk assessment for workplace accidents assists in mitigating the negative impact on both employees and the organization.
Manufacturers have distinct issues regarding fuel handling and hazardous waste disposal in facilities. Sudden leaks or spills may be extremely costly to clean up and result in fines from state and federal agencies. Risk assessments for such plant accidents assist businesses in mitigating financial losses.
Essential machinery throughout the production process might fail at any time, incurring significant repair or replacement costs. Therefore, it's critical to recognize that business property insurance may not cover mechanical issues.
Risk assessment and prepayment solutions protect against equipment failures without interfering with typical company operations.
Supply Chain Disruption
Dependence on your supply chain may result in unintended consequences that are beyond your control. For example, if you experience downtime on the manufacturing line due to a supplier's failure to supply materials or parts, you risk losing revenue and profitability. If a disturbance to your supply chain poses a hazard, risk management can assist you in managing it more effectively by quickly identifying the risk and providing a suitable response.
Operation Temporarily Suspended
Depending on the severity of the weather event, a factory might be severely damaged or perhaps utterly wrecked. While major repairs or rebuilding are being undertaken, recouping lost income might be vital to the business's future profitability.
Risk assessment in this area enables your organization to budget for overhead expenditures such as rent, payroll, and tax responsibilities during the period of suspension of operations.
Risk management is critical in manufacturing because it enables manufacturers to comprehend and anticipate scenarios and create a well-planned response that avoids unnecessary overhead costs or delays in delivering the production cycle's final result. Manufacturing risks are undoubtedly not limited to the risks listed above and may vary according to the nature of the business and regional environmental conditions. Therefore, create a well-defined strategy to overcome threats in your business and be productive at all times.
How are manufacturing business risks classified?
In most cases, the business risk may be categorized into four types: strategic risk, regulatory compliance risks, operational compliance risks, and reputational risks.
Why should a manufacturer conduct a risk assessment?
Every manufacturing employment has risks for injury or illness. But risk evaluations can significantly minimize workplace injuries and illnesses. In addition, they assist companies in discovering strategies to reduce health and safety risks and enhance knowledge about dangers.
Article | May 20, 2021
The transformation of raw materials through mechanical, physical, or chemical processes into a new product is the definition of manufacturing in the U.S. These businesses include plants, mills, factories, and warehouses and they rely on power-driven equipment to produce their products.
Small businesses and home-based businesses are included in the scope of U.S. manufacturing - this includes sectors like tailor-made clothing, bakeries, candy stores, or toy/crafts creators. Additionally, companies that contract with the businesses in these industries are included in the sector of American manufacturing. It is worth noting: U.S. manufacturing does not include anything relating to housing or commercial construction.
Article | December 16, 2021
Computer-aided manufacturing (CAM) is a technology that revolutionized the manufacturing business. Pierre Bézier, a Renault engineer, produced the world's first real 3D CAD/CAM application, UNISURF CAD. His game-changing program redefined the product design process and profoundly altered the design and manufacturing industries.
So, what is CAM in its most basic definition?
Computer-aided manufacturing (CAM) is the application of computer systems to the planning, control, and administration of manufacturing operations. This is accomplished by using either direct or indirect links between the computer and the manufacturing processes. In a nutshell, CAM provides greater manufacturing efficiency, accuracy, and consistency.
As technology takes over and enhances many of the processes we used to handle with manual labor, we are freed up to use our minds creatively, which leads to bigger and better leaps in innovation and productivity.”
– Matt Mong, VP Market Innovation and Project Business Evangelist at Adeaca
In light of the numerous advantages and uses of computer-aided manufacturing, manufacturers have opted to use it extensively. The future of computer-aided manufacturing is brightening due to the rapid and rising adoption of CAM.
According to Allied Market Research, the global computer-aided manufacturing market was worth $2,689 million in 2020 and is expected to reach $5,477 million by 2028, rising at an 8.4% compound annual growth rate between 2021 and 2028.
Despite all this, each new development has benefits and challenges of its own. In this article, we'll discuss the benefits of CAM, the challenges that come with it, and how to deal with them. Let's start with the advantages of computer-aided manufacturing.
Benefits of Computer Aided Manufacturing (CAM)
There are significant benefits of using computer-aided manufacturing (CAM). CAM typically provides the following benefits:
Increased component production speed
Maximizes the utilization of a wide variety of manufacturing equipment
Allows for the rapid and waste-free creation of prototypes
Assists in optimizing NC programs for maximum productivity during machining
Creates performance reports automatically
As part of the manufacturing process, it integrates multiple systems and procedures.
The advancement of CAD and CAM software provides visual representation and integration of modeling and testing applications.
Greater precision and consistency, with similar components and products
Less downtime due to computer-controlled devices
High superiority in following intricate patterns like circuit board tracks
Three Challenges in CAM and Their Solutions
We have focused on the three primary challenges and their solutions that we have observed.
Receiving Incomplete CAD Updates
Receiving insufficient CAD updates is one of the challenges. If, for example, the part update from a CAD engineer does not include the pockets that are required in the assembly, to the CAM engineer.
SOLUTION: A modeler that enables developers of a CAM programs to create intuitive processes for features such as feature extraction and duplication across CAD version updates. A modeler is capable of recognizing and extracting the pocket's architecture and the parameters that define it. Additionally, the CAM application can enable the engineer to reproduce the pocket in a few simple steps by exploiting the modeler's editing features such as scaling, filling, extruding, symmetrical patterning, and removing.
Last Minute Design Updates
The second major challenge is last-minute design changes may impact manufacturers as a result of simulation.
SOLUTION: With 3D software components, you may create applications in which many simulation engineers can work together to make design modifications to the CAD at the same time, with the changes being automatically merged at the end.
Challenging Human-driven CAM Manufacturing
The third major challenge we have included is that CAM engineers must perform manual steps in human-driven CAM programming, which takes time and requires expert CAM software developers. Furthermore, when the structure of the target components grows more complicated, the associated costs and possibility of human failure rise.
SOLUTION: Self-driving CAM is the best solution for this challenge. Machine-driven CAM programming, also known as self-driving CAM, provides an opportunity to improve this approach with a more automated solution. Preparing for CAM is simple with the self-driving CAM approach, and it can be done by untrained operators regardless of part complexity. The technology handles all of the necessary decisions for CAM programming operations automatically. In conclusion, self-driving CAM allows for efficient fabrication of bespoke parts, which can provide substantial value and potential for job shops and machine tool builders.
Computer Aided Manufacturing Examples
CAM is widely utilized in various sectors and has emerged as a dominant technology in the manufacturing and design industries. Here are two examples of sectors where CAM is employed efficiently and drives solutions to many challenges in the specific business.
Virtual 3D prototype systems, such as Modaris 3D fit and Marvellous Designer, are already used by designers and manufacturers to visualize 2D blueprints into 3D virtual prototyping. Many other programs, such as Accumark V-stitcher and Optitex 3D runway, show the user a 3D simulation to show how a garment fits and how the cloth drapes to educate the customer better.
Aerospace and Astronomy
The James Webb Space Telescope's 18 hexagonal beryllium segments require the utmost level of precision, and CAM is providing it. Its primary mirror is 1.3 meters wide and 250 kilograms heavy, but machining and etching will reduce the weight by 92% to just 21 kilograms.
What is the best software for CAM?
Mastercam has been the most extensively utilized CAM software for 26 years in a row, according to CIMdata, an independent NC research business.
How CAD-CAM helps manufacturers?
Customers can send CAD files to manufacturers via CAD-CAM software. They can then build up the machining tool path and run simulations to calculate the machining cycle times.
What is the difference between CAD and CAM?
Computer-aided design (CAD) is the process of developing a design (drafting). CAM is the use of computers and software to guide machines to build something, usually a mass-produced part.
Article | March 31, 2021
Everyday the supply chain is jeopardized. A freighter stuck in the Suez Canal has severe ripple effects in raw material goods making their way around the world. Trade tariffs and unpredictable consequences from COVID have encouraged many US manufacturers to reshore bringing jobs stateside. This strategy will shift the supply chain challenge to a staffing challenge.
As the manufacturing industry is poised for rapid growth over the next 24 months, hiring the best workers once again becomes the top challenge. As the workforce is vaccinated and reshoring the supply chain becomes a clarion call for industry, finding the right people with the right skills forces plant managers, operations managers, and HR managers to find new and innovative recruiting strategies. FactoryFix is an online platform that matches vetted manufacturing workers with companies seeking specific skill sets. This platform sets a new standard in how small to mid-sized manufacturers hire talent across the U.S.