Article | April 1, 2021
April 12 -15 ProMatDX, the largest material handling event, will take place virtually. It will feature dozens of AGV vendors. Sadly, some of these highly innovating products still need to be plugged-in to capture power. No more.
Wiferion in process charging eliminates the plug-in charging making AGVs truly autonomous. In process charging eliminates the waste of AGV downtime – the fleet is always working AND charging. In process charging is safe ensuring the OSHA, ergonomics, and danger to workers significantly reduced. In process charging is cost-efficient because full vehicle deployment means a reduced fleet count ensuring a rapid ROI.
For OEMs of AGVs and industrial trucks implementing inductive charging technology solves the wear and tear issues caused by conventional charging methods as well as making vehicles fully autonomous. For end-users of AGVs and industrial trucks, inductive charging in combination with lithium batteries can improve fleet availability by more than 30%.
Whether driverless transport systems (AGVs), electric forklifts, or mobile robots (AMRs), the efficient use of industrial trucks is a decisive factor for competitiveness during ever- increasing cost pressures. The energy systems are being scrutinized and lithium-ion batteries are the preferred technology. The advantages versus lead-acid batteries (including the ability to recharge faster and more often) are obvious. Until now the full potential of storage technology has not been fully realized.
Article | April 6, 2021
As the pandemic upended plans for marketing and sales in 2020, it forced marketers in the manufacturing industry to adopt the tactics of the remote world. Many of them are still wondering how they can focus on driving business growth in 2021. Intent data has undoubtedly added some spice to the season of online marketing.
Research conducted by B2BecNews on 110 businesses found that 59.5% of business buyers research two to three websites before buying while 29.7% research up to seven websites.
The “How” of Intent Data
Intent data allows businesses to channel their expenditure to the leads that matter the most. It boosts sales and encourages marketers to be smarter by doing more in less time.
Moreover, b2b buyers now tend to look for an immersive digital experience and are likely to conduct more and more searches before engaging with a brand. Such digital activity will tell you what a visitor’s intentions are called the intent data.
To drive your business, here are some tried-and-true and unexpectedly productive ways to scale up your marketing and sales game using intent data.
Improve your Sales Pitches/Pipelines
When you are expanding or redefining your business because you want to target a new market or audience, third-party intent data is a decent place to start. Through intent data, your sales team can build a year’s pipeline by reaching target audiences.
To get the value of your sales, you can use intent data categorizing with a professional group, seniority, functional area, business size, and more for targeted prospects. And if your data provides contact information, your sales team will have an even deeper understanding of the dynamics of prospects’ buying activities.
Moreover, learning about the fact if a CEO or a random visitor visits your website creates a difference between a quality lead and a generic one. There are times when organizations don’t vigorously look for a product. But with the right content force, you can direct them towards a purchase decision. This way, you can get a chance to pitch and improve sales.
So, how can content pitch sales?
The next point explains the importance of nurturing content on your website.
Nurture with Personalized Content
Once you target new prospects, you can nurture them with excellent and informational marketing content. These can be in various forms like articles, blogs, advertisements, social media, infographics, and more.
Personalization results better in the sea of marketing (digitally or manually). Since the pandemic has pushed the digital world extensively, personalization is on a hike. Companies that personalize their marketing strategies to communicate are improved by 86% in customer relations, have higher conversation rates, and observed improvement in businesses.
To personalize your content, you have to look at intent data and search for the prospect’s interests. After your research, you can create content for them. Paying attention to contextual information will improve the prospect’s experience, causing them to turn into your client.
After you create personalized content, what will happen next? Find out ahead.
Generate High-Quality Leads
Intent data tells you how far each prospect has progressed. A combination of intent and context data helps with lead scoring, which shows you the quality of leads.
A visit to your website by an intern is somewhat different from a CEO’s visit.
Consuming content on general industry information differs in value from product-specific content that provides information on websites.
When a visitor compares prices, it intends to buy, opposite to a visitor who bookmarks pages.
Besides, intent data for manufacturers also tells:
Channels to target your prospects actively.
Content to encourage
Offers to serve
The timing of each lead nurturing action
Improve Account-Based Marketing Campaigns
Account-based marketing and intent data go hand-in-hand. So, it would be best if you worked through every possible path to collect more information about your prospects. This way, it will help you take a focused approach. Once you identify the interested prospects, you can focus your time and energy on those accounts and expand your reach.
Intent data helps you to find more in-market customers. They can score leads with better precision and re-shape your marketing campaigns by showing up with the right message at the right time.
Include Marketing Automation Operations
Implementing marketing automation technologies with intent data will save your team's time. As they usually spent analyzing data entry by automatically setting alerts when buyers intend to show their interest.
Why is Intent Data for Manufacturing Becoming Crucial for Future?
With marketers, or say, manufacturing marketers, it's always vital to drive revenue for business and get ahead with trending marketing paths. For this, knowing intent of prospects is a must to gain success.
Knowing a prospector’s behavior can help your marketing team target a specific profile and create personalized content on demand to increase their purchase decision. After all the information is collected, prospects become more knowledgeable and informed of the decision they make. More information attracts more potential buyers when they are informed conveniently at the right time and manner. In this entire process, you gain an increased ROI.
These aspects are incomplete without intent data for manufacturers, which targets numerous data and creates an easy baseline so that marketers can learn precisely about potential prospects’ behaviors. Intent data can be used for the future through a particular pattern. Generic marketing campaigns delivered to a random audience will simply shut down your business. Because now, the users expect to see content that’s valuable to them.
Therefore, intent data for manufacturers is the key to providing better answers and solutions and allowing better marketing budgets. Both of these lead to more conversions which results in more revenue.
Frequently Asked Questions
How is intent data collected?
The collection of intent data is not new to marketers. It has gained prominence only after the pandemic. The data is gathered through the website. Its analysis is done by tracking visitors to the website, clicks, chatbots, duration of stay, and information search.
How can manufacturers leverage intent data?
The steps to leverage are:
1. identify the prospect and what it wants to search or trying to search. It could be keywords, trending words or phrases, and more.
2. Create quality yet informational content following the prospects’ interest.
3. Now, it’s time to promote content with the right on different channels to attract prospects.
What are the intent data tools for manufacturers?
Some good intent data tools manufacturers can use are:
What is buyer intent data for manufacturers?
Through buyer intent data, your sales team easily reaches out and gets engaged with the right prospect at the right time. Manufacturing marketers use it to plan can create effective campaigns to target potential ones and convince them to buy.
"name": "HOW IS INTENT DATA COLLECTED?",
"text": "The collection of intent data is not new to marketers. It has gained prominence only after the pandemic. The data is gathered through the website. Its analysis is done by tracking visitors to the website, clicks, chatbots, duration of stay, and information search."
"name": "HOW CAN MANUFACTURERS LEVERAGE INTENT DATA?",
"text": "The steps to leverage are:
1. identify the prospect and what it wants to search or trying to search. It could be keywords, trending words or phrases, and more.
2. Create quality yet informational content following the prospects’ interest.
3. Now, it’s time to promote content with the right on different channels to attract prospects."
"name": "WHAT ARE THE INTENT DATA TOOLS FOR MANUFACTURERS?",
"text": "Some good intent data tools manufacturers can use are:
"name": "WHAT IS BUYER INTENT DATA FOR MANUFACTURERS?",
"text": "Through buyer intent data, your sales team easily reaches out and gets engaged with the right prospect at the right time. Manufacturing marketers use it to plan can create effective campaigns to target potential ones and convince them to buy."
Article | January 3, 2022
Production planning and control are critical components of any manufacturing organization. It helps organizations with the regular and timely delivery of their goods. Furthermore, it allows manufacturing businesses to increase their plant’s efficiency and reduce production costs.
Numerous software and tools for production scheduling and planning are available on the market, including Visual Planning, MaxScheduler, and MRPeasy, which assist manufacturing organizations in planning, scheduling, and controlling their production.
According to KBV Research, the manufacturing operations management software market is anticipated to reach $14.6 billion by 2025 globally, expanding at a market growth of 10.2 percent CAGR during the forecast period.
So, what exactly is production planning and control?
Production planning is an administrative process within a manufacturing business. It ensures that sufficient raw materials, personnel, and other necessary items are procured and prepared to produce finished products according to the specified schedule.
Scheduling, dispatch, inspection, quality control, inventory management, supply chain management, and equipment management require production planning. Production control makes sure that the production team meets the required production targets, maximizes resource utilization, manages quality, and saves money.
“Manufacturing is more than just putting parts together. It’s coming up with ideas, testing principles and perfecting the engineering, as well as final assembly.”
– James Dyson
In oversize factories, production planning and control are frequently managed by a production planning department, which comprises production controllers and a production control manager. More significant operations are commonly monitored and controlled from a central location, such as a control room, operations room, or operations control center.
Why Should You Consider Production Planning?
An efficient production process that meets the needs of both customers and the organization can only be achieved through careful planning in the early stages of production. In addition, it streamlines both customer-dependent and customer-independent processes, such as on-time delivery and production cycle time.
A well-designed production plan minimizes lead time, the period between placing an order and its completion and delivery. The definition of lead time varies slightly according to the company and the type of production planning required. For example, in supply chain management, lead time refers to the time required for parts to be shipped from a supplier.
Steps in Production Planning and Control
The first stage of production planning determines the path that raw materials will take from their source to the finished product. You will use this section to determine the equipment, resources, materials, and sequencing used.
It is necessary to determine when operations will occur during the second stage of production planning. In this case, the objectives may be to increase throughput, reduce lead time, or increase profits, among other things. Numerous strategies can be employed to create the most efficient schedule.
The third and final production control stage begins when the manufacturing process is initiated. When the scheduling plan is implemented, materials and work orders are released, and work is flowing down the production line, the production line is considered to be running smoothly.
The fourth stage of manufacturing control ascertains whether the process has any bottlenecks or inefficiencies. You can use this stage to compare the predicted run hours and quantities with the actual values reported to see if any improvements can be made to the processes.
Production Planning Example
Though production planning is classified into several categories, including flow, mass production, process, job, and batch, we will look at a batch production planning example here.
Manufacturing products in batches is known as "batch production planning." This method allows for close monitoring at each stage of the process, and quick correction since an error discovered in one batch can be corrected in the next batch. However, batch manufacturing can lead to bottlenecks or delays if some equipment can handle more than others, so it's critical to consider capacity at every stage.
Consider the following example of batch production planning:
Jackson's Baked Goods is in the process of developing a production plan for their new cinnamon bread. To begin with, the head baker determines the batch production time required by the recipe.
He then adjusts the bakery's weekly ingredient orders to include the necessary supplies and schedules the weekly cinnamon bread bake during staff downtime.
Finally, he creates a list of standards for the bakery staff to check at each production stage, allowing them to quickly identify any substandard materials or other batch errors without wasting processing time on subpar cinnamon bread.
Running a smooth and problem-free manufacturing operation relies heavily on a precise production planner. Many large manufacturing companies already have a strong focus on streamlining their processes and making the most of every manufacturing operation, but small manufacturing companies still have work to do in this area. As a result, plan, schedule, and control a production that will enable you to run your business in order to meet its objectives.
What is the difference between planning and scheduling in production?
Production planning and scheduling are remarkably similar. But, it is critical to note that planning determines what operations need to be done and scheduling determines when and who will do the operations.
What is a production plan?
A product or service's production planning is the process of creating a guide for the design and manufacture of a given product or service. Production planning aims to help organizations make their manufacturing processes as productive as possible.
Article | October 8, 2021
The trends in the manufacturing industry for 2022 are expanding and altering the industry's conventional face. The future of manufacturing is going to merge with digitalization and technological applications. As a result, all operation methods, products, and manufacturing outcomes will be modernized with new technology applications.
To brighten the future of manufacturing, manufacturing companies must examine new trends in the industry before developing their manufacturing plans for 2022. Technological advancements are the next game-changer in the manufacturing business.
Adeaca's Vice President of Market Innovation and Project Business Evangelist had recently quoted in an interview with Media7 as,
“As technology takes over and enhances many of the processes we used to handle with manual labor, we are freed up to use our minds creatively, which leads to bigger and better leaps in innovation and productivity.” – Matt Mong, VP Market Innovation and Project Business Evangelist at Adeaca
The new trends in manufacturing are leveling up every part and element of the industry. In this article, we'll look at a new trend for each industry aspect that's assisting manufacturers in speeding up the production process, increasing ROI, and propelling their manufacturing business to new heights.
Additionally, it will assist you in addressing current industry challenges such as forecasting product demand, addressing skilled manpower shortages, and increasing manufacturing plant efficiency.
Five Manufacturing Industry Trends to Watch in 2022
Emerging trends in manufacturing provide a chance to review your production strategy for products and processes. Check out below the upcoming trends in manufacturing that are getting attention in the industry.
Customer Engagement and Purchase Experience
Creating an exceptional digital customer experience is a new trend in manufacturing. According to industry experts, mapping the customer journey and their interactions with your products is the first step towards establishing a positive connection with your potential consumers.
A few of the most popular strategies to improve the consumer purchasing experience and engagement are as follows:
Build a knowledge base for your products on your business website
Create a comprehensive FAQs page that addresses all of the buyer's possible queries
Create a chatbot to provide immediate help to the buyer with further inquiries
Create a brand story and a comprehensive description of your manufacturing business
If possible, provide product statistics and success stories, and content about consumer satisfaction with your product
Create a product functionality video or explanatory picture material to familiarize the potential customer with your product
These are some of the trends that engage your prospective buyers and increase their purchasing experience through a range of product-related information and educate them about you and your products.
Smart Technology-enabled Products
Smart is the new norm in every industry. The old operations and goods that were once a part of everyone's life have now been replaced by technology. Manufacturing is no exception to this alteration. Due to the increasing demand for smart products among customers, every company is now looking forward to inventing and manufacturing smart products.
Explore and understand how you may incorporate cutting-edge technology (Artificial Intelligence, Machine Learning, Edge Computing, and Digital Twins, and more) into your products to help them stay updated with manufacturing trends.
Virtual and Augmented Reality in Manufacturing (Industry 4.0)
Transforming traditional manufacturing systems and processes into smart, tech-savvy ones is a new trend in manufacturing. The future of manufacturing is expected to witness this digitization in 2022 and beyond. Therefore, you must convert your conventional manufacturing plants into smart ones, i.e., as per the concept of Industry 4.0 – the fourth industrial revolution.
Discover how prominent companies are implementing Industry 4.0
The following are some popular transformations that many popular manufacturing factories are adopting to become part of the industry revolution.
To achieve a zero-carbon footprint, manufacturers may use analytics systems to determine the amount of trash they create and develop ways to eliminate it. (Implemented by Whirlpool)
Utilize an analytics platform to decipher usage data for energy, water, and other utilities. (Implemented by Whirlpool)
Utilize technology such as Siemens' Mindsphere, which enables online analysis of several aspects of a production plant and helps manufacturers create digital models using real-time data. (Implemented by Siemens)
Utilize a combination of IoT and cloud-based technologies to avoid downtime and gather analytics data. (Implemented by Hirotec – a Japan based manufacturing company)
Machine learning technology can be used to foretell and avoid system failures in your manufacturing plant. (Implemented by Hirotec – a Japan based manufacturing company)
Utilize robotics and to accelerate manufacturing across many verticals. (Implemented by Ford)
Utilize 3D printing to improve the precision of product design and to avert product defects during the early production stage. (Implemented by Aerospace: Airbus) These are some examples that other well-known manufacturing companies in the market, such as Hewlett-Packard, Ford, Whirlpool, and Siemens are currently using. So, consult an expert and determine how to leverage emerging technology to turn your production plant into a smart manufacturing unit.
Internet of Things (IoT) to Boost Revenue
Manufacturing companies have begun to leverage the Internet of Things to establish connectivity between machines and operational procedures throughout manufacturing. This linkage between machine and operation significantly decreases the human supervision required for each step and completely automates them.
Manufacturers intend to incorporate these IoT trends in manufacturing into both their products and operational processes. IoT further enables manufacturers to operate and monitor their work remotely. As a result, they can concentrate on developing new strategies and preparing for future ventures.
Shifting Focus from B2B to B2C Model
Several manufacturers skip intermediaries and connect directly with their consumers to sell efficiently to their target consumer group. This purposeful approach has multiple benefits, which are outlined below.
Manufacturers may skip the lengthy retail sales cycle and achieve a shorter time to market
The absence of a third party between the manufacturer and the customer reduces the risk of brand misinterpretation or dilution
Direct interaction with customers enables manufacturers to obtain more accurate consumer data, product feedback, and requirements for new product development
Manufacturers can control the price of their products due to the absence of a third party between them and the target consumer group
These benefits of the B2C model attract manufacturers and encourage them to develop added production techniques with these benefits in mind.
Technology, innovation, and digitization are the future of manufacturing. The IoT trends in manufacturing are essential for industrial production and will allow the manufacturing industry to obtain a new competitive edge. Hence, manufacturers must keep in mind this industry revolution (industry 4.0 and 5.0) while developing strategies for their manufacturing operations in 2022.
What are the benefits of adopting the Internet of Things in manufacturing?
IoT devices can monitor industrial operations, manufacturing cycles, and other warehouse data management processes automatically. This benefit decreases the amount of time spent monitoring individual operations and increases production speed.
What role will smart manufacturing play in the future?
According to a grand view research analysis, the smart manufacturing market was worth USD 236.12 billion in 2020 and is expected to extend at a 12.4 percent compound annual growth rate to reach USD 589.98 billion by 2028.
What are the critical components of the smart factory of the future?
Robotics, the Internet of Things, big data, and cloud-based administration will be critical components of the future smart factory.