4 ways to reduce cost of production and prototyping with 3D printing

LUCIE GAGET| June 14, 2018
4 WAYS TO REDUCE COST OF PRODUCTION AND PROTOTYPING WITH 3D PRINTING
3D printing is a time saving and money saving manufacturing technique which could totally help you to improve your manufacturing operations. In this blog post, we are going to focus on the money saving aspect of additive manufacturing. Using 3D printing could be an amazing way to reduce your costs for prototyping, but also for production.

Spotlight

Nexans

Nexans brings energy to life through an extensive range of cables and cabling solutions that deliver increased performance for our customers worldwide. Nexans’ teams are committed to a partnership approach that supports customers in four main business areas: Power transmission and distribution (submarine and land), Energy resources (Oil & Gas, Mining and Renewables), Transportation (Road, Rail, Air, Sea) and Building (Commercial, Residential and Data Centers). Nexans’ strategy is founded on continuous innovation in products, solutions and services, employee development, customer training and the introduction of safe, low-environmental-impact industrial processes.

OTHER ARTICLES

Wireless AGVs May Prove Most Important ProMatDX Innovation

Article | April 1, 2021

April 12 -15 ProMatDX, the largest material handling event, will take place virtually. It will feature dozens of AGV vendors. Sadly, some of these highly innovating products still need to be plugged-in to capture power. No more. Wiferion in process charging eliminates the plug-in charging making AGVs truly autonomous. In process charging eliminates the waste of AGV downtime – the fleet is always working AND charging. In process charging is safe ensuring the OSHA, ergonomics, and danger to workers significantly reduced. In process charging is cost-efficient because full vehicle deployment means a reduced fleet count ensuring a rapid ROI. For OEMs of AGVs and industrial trucks implementing inductive charging technology solves the wear and tear issues caused by conventional charging methods as well as making vehicles fully autonomous. For end-users of AGVs and industrial trucks, inductive charging in combination with lithium batteries can improve fleet availability by more than 30%. Whether driverless transport systems (AGVs), electric forklifts, or mobile robots (AMRs), the efficient use of industrial trucks is a decisive factor for competitiveness during ever- increasing cost pressures. The energy systems are being scrutinized and lithium-ion batteries are the preferred technology. The advantages versus lead-acid batteries (including the ability to recharge faster and more often) are obvious. Until now the full potential of storage technology has not been fully realized.

Read More

Manufacturing in 2022 - Five Emerging Trends in the Industry

Article | October 8, 2021

The trends in the manufacturing industry for 2022 are expanding and altering the industry's conventional face. The future of manufacturing is going to merge with digitalization and technological applications. As a result, all operation methods, products, and manufacturing outcomes will be modernized with new technology applications. To brighten the future of manufacturing, manufacturing companies must examine new trends in the industry before developing their manufacturing plans for 2022. Technological advancements are the next game-changer in the manufacturing business. Adeaca's Vice President of Market Innovation and Project Business Evangelist had recently quoted in an interview with Media7 as, “As technology takes over and enhances many of the processes we used to handle with manual labor, we are freed up to use our minds creatively, which leads to bigger and better leaps in innovation and productivity.” – Matt Mong, VP Market Innovation and Project Business Evangelist at Adeaca The new trends in manufacturing are leveling up every part and element of the industry. In this article, we'll look at a new trend for each industry aspect that's assisting manufacturers in speeding up the production process, increasing ROI, and propelling their manufacturing business to new heights. Additionally, it will assist you in addressing current industry challenges such as forecasting product demand, addressing skilled manpower shortages, and increasing manufacturing plant efficiency. Five Manufacturing Industry Trends to Watch in 2022 Emerging trends in manufacturing provide a chance to review your production strategy for products and processes. Check out below the upcoming trends in manufacturing that are getting attention in the industry. Customer Engagement and Purchase Experience Creating an exceptional digital customer experience is a new trend in manufacturing. According to industry experts, mapping the customer journey and their interactions with your products is the first step towards establishing a positive connection with your potential consumers. A few of the most popular strategies to improve the consumer purchasing experience and engagement are as follows: Build a knowledge base for your products on your business website Create a comprehensive FAQs page that addresses all of the buyer's possible queries Create a chatbot to provide immediate help to the buyer with further inquiries Create a brand story and a comprehensive description of your manufacturing business If possible, provide product statistics and success stories, and content about consumer satisfaction with your product Create a product functionality video or explanatory picture material to familiarize the potential customer with your product These are some of the trends that engage your prospective buyers and increase their purchasing experience through a range of product-related information and educate them about you and your products. Smart Technology-enabled Products Smart is the new norm in every industry. The old operations and goods that were once a part of everyone's life have now been replaced by technology. Manufacturing is no exception to this alteration. Due to the increasing demand for smart products among customers, every company is now looking forward to inventing and manufacturing smart products. Explore and understand how you may incorporate cutting-edge technology (Artificial Intelligence, Machine Learning, Edge Computing, and Digital Twins, and more) into your products to help them stay updated with manufacturing trends. Virtual and Augmented Reality in Manufacturing (Industry 4.0) Transforming traditional manufacturing systems and processes into smart, tech-savvy ones is a new trend in manufacturing. The future of manufacturing is expected to witness this digitization in 2022 and beyond. Therefore, you must convert your conventional manufacturing plants into smart ones, i.e., as per the concept of Industry 4.0 – the fourth industrial revolution. Discover how prominent companies are implementing Industry 4.0 The following are some popular transformations that many popular manufacturing factories are adopting to become part of the industry revolution. To achieve a zero-carbon footprint, manufacturers may use analytics systems to determine the amount of trash they create and develop ways to eliminate it. (Implemented by Whirlpool) Utilize an analytics platform to decipher usage data for energy, water, and other utilities. (Implemented by Whirlpool) Utilize technology such as Siemens' Mindsphere, which enables online analysis of several aspects of a production plant and helps manufacturers create digital models using real-time data. (Implemented by Siemens) Utilize a combination of IoT and cloud-based technologies to avoid downtime and gather analytics data. (Implemented by Hirotec – a Japan based manufacturing company) Machine learning technology can be used to foretell and avoid system failures in your manufacturing plant. (Implemented by Hirotec – a Japan based manufacturing company) Utilize robotics and to accelerate manufacturing across many verticals. (Implemented by Ford) Utilize 3D printing to improve the precision of product design and to avert product defects during the early production stage. (Implemented by Aerospace: Airbus) These are some examples that other well-known manufacturing companies in the market, such as Hewlett-Packard, Ford, Whirlpool, and Siemens are currently using. So, consult an expert and determine how to leverage emerging technology to turn your production plant into a smart manufacturing unit. Internet of Things (IoT) to Boost Revenue Manufacturing companies have begun to leverage the Internet of Things to establish connectivity between machines and operational procedures throughout manufacturing. This linkage between machine and operation significantly decreases the human supervision required for each step and completely automates them. Manufacturers intend to incorporate these IoT trends in manufacturing into both their products and operational processes. IoT further enables manufacturers to operate and monitor their work remotely. As a result, they can concentrate on developing new strategies and preparing for future ventures. Shifting Focus from B2B to B2C Model Several manufacturers skip intermediaries and connect directly with their consumers to sell efficiently to their target consumer group. This purposeful approach has multiple benefits, which are outlined below. Manufacturers may skip the lengthy retail sales cycle and achieve a shorter time to market The absence of a third party between the manufacturer and the customer reduces the risk of brand misinterpretation or dilution Direct interaction with customers enables manufacturers to obtain more accurate consumer data, product feedback, and requirements for new product development Manufacturers can control the price of their products due to the absence of a third party between them and the target consumer group These benefits of the B2C model attract manufacturers and encourage them to develop added production techniques with these benefits in mind. Final Words Technology, innovation, and digitization are the future of manufacturing. The IoT trends in manufacturing are essential for industrial production and will allow the manufacturing industry to obtain a new competitive edge. Hence, manufacturers must keep in mind this industry revolution (industry 4.0 and 5.0) while developing strategies for their manufacturing operations in 2022. FAQs What are the benefits of adopting the Internet of Things in manufacturing? IoT devices can monitor industrial operations, manufacturing cycles, and other warehouse data management processes automatically. This benefit decreases the amount of time spent monitoring individual operations and increases production speed. What role will smart manufacturing play in the future? According to a grand view research analysis, the smart manufacturing market was worth USD 236.12 billion in 2020 and is expected to extend at a 12.4 percent compound annual growth rate to reach USD 589.98 billion by 2028. What are the critical components of the smart factory of the future? Robotics, the Internet of Things, big data, and cloud-based administration will be critical components of the future smart factory.

Read More

4 Strategies to Make Your Production More Efficient in 2021

Article | July 13, 2021

The start of the new year is a great time to critically take a look at your processes and see how you can improve. Here at FANUC, we have identified four key strategies manufacturers can use to boost their efficiency! Add Automation Automation can increase production and efficiency no matter the type or complexity of the manufactured products. With space at a premium in most production facilities, many job shops look for machine tending robots that are easy to integrate and have a small footprint. FANUC's robots and software make it easy to connect the equipment and improve throughput as well as overall equipment effectiveness. Quick and Simple Startup of Robotization (QSSR) allows up to four machine tools to be connected with a robot using just one Ethernet cable. Use the Latest and Greatest Machining Practices and Technology Many manufacturers leave performance on the table due to outdated processes and programming. Are you getting the most out of your machining? Now’s the time to look at the advantages in new CNC technology. Because new controls have greater processing speed and can implement advanced algorithms, they can do a lot more for your operations. Moreover, the interfaces have become simpler and more intuitive, so they are easier to use than ever before. Digitize Your Process New digital tools are breathing innovation and life into increasingly more areas of manufacturing, including the application of digital twins in the machining industry. Digital twins provide virtualization of the machine, control and manufacturing process. Digitalizing traditional manufacturing processes have the potential to make operations more efficient by proving out production processes in the virtual world. That means less waste, more efficiency and a more equipped workforce. Upgrade Your Shop with a CNC Retrofit Do you have legacy equipment? Running older machinery can have hidden costs, such as taking the time to source and find older replacement controls leading to significantly longer total downtime and production losses. However, scrapping old equipment and starting new, might be too expensive, especially when factoring in tooling, fixturing, rigging and foundation. Plus, new machines may require more training for staff. A CNC retrofit, with new FANUC CNCs, industrial PCs, servos and cabling, can speed up processing and reduce cycle time by as much as 50 percent.

Read More

How Smart Manufacturing Is Powered by Digital Twin Technology?

Article | December 8, 2021

A digital twin is a virtual model of an object or system that comprises its lifecycle. It is updated with real-time data and aids decision-making through simulation, machine learning, and reasoning for the production system. IoT sensor data from the original object is used to create a digital twin of the system. This cloud-connected data allows engineers to monitor systems and model system dynamics in real-time. Modifications can be tested on the digital twin before making changes to the original system. Considering that digital twins are supposed to replicate a product's complete lifecycle and are used throughout the production process, it's not unexpected that digital twins have become prevalent in all stages of manufacturing. “More than a blueprint or schematic, a digital twin combines a real-time simulation of system dynamics with a set of executive controls,” – Dr. Daniel Araya, consultant and advisor with a special interest in artificial intelligence, technology policy, and governance Companies will increasingly embrace digital twins to boost productivity and decrease expenses. As per recent research by Research and Markets, nearly 36% of executives across industries recognize the benefits of digital twinning, with half planning to implement it by 2028.So how does this digital twin technology benefit modern manufacturing? Let's have a look. How the Digital Twin Drives Smart Manufacturing Digital twins in manufacturing are used to replicate production systems. Manufacturers can develop virtual representations of real-world products, equipment, processes, or systems using data from sensors connected to machines, tools, and other devices. In manufacturing, such simulations assist in monitoring and adapting equipment performance in real-time. With machine learning techniques, digital twins can predict future events and anticipate potential difficulties. For maintenance, digital twins allow for quick detection of any problems. They collect real-time system data, prior failure data, and relevant maintenance data. The technique employs machine learning and artificial intelligence to predict maintenance requirements. Using this data, companies can avoid production downtime. Digital Twin and Artificial Intelligence (AI) in manufacturing Using digital twins and AI in production can enhance uptime by predicting potential failures and keeping equipment working smoothly. In addition, there are significant cost savings in the planning and design process as digital twins and AI can be used to replicate a specific scenario. Maintenance is another area that has seen significant progress with the use of digital twin manufacturing. A Digital Twin powered by AI can predict when a piece of equipment will fail, allowing you to arrange predictive maintenance that is not simply taking information from OEM manuals but can significantly cut maintenance expenses along with reducing downtime. Using the digital twin, it is feasible to train virtual workers in high-risk functions, similar to how pilots are trained using flight simulators. It also frees up highly skilled workers to upgrade the plant and streamline operations. General Electric Created the Most Advanced Digital Twin General Electric Company (GE) is a multinational business based in Boston that was founded in 1892. It has developed the world's most advanced digital twin, which blends analytic models for power plant components that monitor asset health, wear, and performance with KPIs (Key Performance Indicators) determined by the customer and the organization's objectives. The Digital Twin is powered by PredixTM, an industrial platform built to manage huge amounts of data and run analytic algorithms. General Electric Company provides extra "control knobs" or "dimensionality" that can be utilized to improve the operation of the system or asset modeled with GE Digital Twin. Final Words Given the numerous advantages of digital twin manufacturing, the potential for digital twins to be used in manufacturing is virtually endless in the near future. There will be a slew of new advancements in the field of digital twin manufacturing. As a result, digital twins are continually acquiring new skills and capabilities. The ultimate goal of all of these enhancements is to create the insights necessary to improve products and streamline processes in the future. FAQ What is a digital twin in manufacturing? The digital twins could be used to monitor and enhance a production line or perhaps the whole manufacturing process, from product design to production. How digital twin benefit manufacturers? Using digital twins to represent products and manufacturing processes, manufacturers can save assembly, installation, and validation time and costs. What is a digital thread? A digital twin is a realistic version of a product or system that replicates a company's equipment, controls, workflows, and systems. The digital thread, on the other hand, records a product's life cycle from creation to dissolution. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{ "@type": "Question", "name": "What is a digital twin in manufacturing?", "acceptedAnswer": { "@type": "Answer", "text": "The digital twins could be used to monitor and enhance a production line or perhaps the whole manufacturing process, from product design to production." } },{ "@type": "Question", "name": "How digital twin benefit manufacturers?", "acceptedAnswer": { "@type": "Answer", "text": "Using digital twins to represent products and manufacturing processes, manufacturers can save assembly, installation, and validation time and costs." } },{ "@type": "Question", "name": "What is a digital thread?", "acceptedAnswer": { "@type": "Answer", "text": "A digital twin is a realistic version of a product or system that replicates a company's equipment, controls, workflows, and systems. The digital thread, on the other hand, records a product's life cycle from creation to dissolution." } }] }

Read More

Spotlight

Nexans

Nexans brings energy to life through an extensive range of cables and cabling solutions that deliver increased performance for our customers worldwide. Nexans’ teams are committed to a partnership approach that supports customers in four main business areas: Power transmission and distribution (submarine and land), Energy resources (Oil & Gas, Mining and Renewables), Transportation (Road, Rail, Air, Sea) and Building (Commercial, Residential and Data Centers). Nexans’ strategy is founded on continuous innovation in products, solutions and services, employee development, customer training and the introduction of safe, low-environmental-impact industrial processes.

Events