.

EVENTS

home.aspx
   
2020 Middle Market Manufacturing Conference
2020 MIDDLE MARKET MANUFACTURING CONFERENCE
February 25-25, 2020
The U.S. middle market over-indexes on manufacturing: Manufacturers represent approximately 17% of middle market companies compared to about 12% of the economy as a whole. Clearly, manufacturing is key to the success of the middle market, which in turn, drives the overall U.S. economy.

Make UK National Manufacturing Conference 2020
MAKE UK NATIONAL MANUFACTURING CONFERENCE 2020
February 25-25, 2020
Exhibiting at the event enables you to promote your services and products to around 800 of Britain’s most successful manufacturing businesses. It’s an opportunity to significantly raise your profile with industry’s top decision makers, and network with future business partners.

International Conference on Mechanical, Manufacturing, Modeling and Mechatronics
INTERNATIONAL CONFERENCE ON MECHANICAL, MANUFACTURING, MODELING AND MECHATRONICS
February 27-19, 2020
Welcome to the official website of 2020 5th International Conference on Mechanical, Manufacturing, Modeling and Mechatronics (IC4M 2020). IC4M 2020 is organzied by Hong Kong Society of Mechanical Engineers(HKSME). The conference will be held in Shenzhen, China, from Feb. 27 to 29, 2020, in conjuncti...

Southern Manufacturing & Electronics 2020
SOUTHERN MANUFACTURING & ELECTRONICS 2020
February 11-13, 2020
Southern Manufacturing and Electronics is the most comprehensive annual industrial exhibition in the UK and a major pan-European showcase for new technology in machinery, production equipment, electronic production and assembly, tooling and components as well as subcontract services across an impres...

The Business of 3D Printing: Medicine, Dentistry and Metals
THE BUSINESS OF 3D PRINTING: MEDICINE, DENTISTRY AND METALS
February 11-12, 2020
This must-attend Summit and Exhibition will be back in February 2020 for its third year, with a new conference track covering metals, as well its established coverage of medical/dental 3DP. As usual, the conference offers over 30 expert speakers, with this year's focus being on end-user experien...

Military Additive Manufacturing Summit
MILITARY ADDITIVE MANUFACTURING SUMMIT
February 05-06, 2020
DSI’s 4th Annual Military Additive Manufacturing Summit is designed as an educational Town Hall forum, where thought leaders & key policy-makers across military services, defense agencies, & civilian organizations can come together for actionable discussions & debate. This year&rsq...

3D & Systems Summit
3D & SYSTEMS SUMMIT
January 27-29, 2020
The 3D & Systems Summit will address the most relevant and advanced topics related to the 3D packaging roadmap, Heterogeneous Integration and System-In-Package manufacturing. The summit will focus on high reliability and high performance of disruptive applications like Mobile and IoT. Invited di...

Manufacturing at the Speed of Light with Augmented Reality
MANUFACTURING AT THE SPEED OF LIGHT WITH AUGMENTED REALITY
January 22-22, 2020
Industry 4.0 is moving fast, and smart companies are seeking the best tools and technologies that are both proven and practical to drive immediate results within their organizations. Return on investment for Industry 4.0 projects can vary widely, often times causing business leaders to be wary of st...

International Conference on Manufacturing Technologies
INTERNATIONAL CONFERENCE ON MANUFACTURING TECHNOLOGIES
January 17-20, 2020
Manufacturing engineering & technology is a varied and challenging field that is becoming increasingly important with the advent of new production methods. Meanwhile, our modern society has entered the era of knowledge and economy. The creation, production and dissemination of knowledge have an ...

Smarter Manufacturing through Better Data: Applications and Benefits of SEMI Interface A / EDA Standards Workshop
SMARTER MANUFACTURING THROUGH BETTER DATA: APPLICATIONS AND BENEFITS OF SEMI INTERFACE A / EDA STANDARDS WORKSHOP
January 10-10, 2020
SEMI global expositions are the premier events for business, networking, collaboration, and education for the semiconductor and microelectronics industries. SEMI recognized achievements in the industry with a number of awards.

International Conference on Mechanical Manufacturing and Industrial Engineering
INTERNATIONAL CONFERENCE ON MECHANICAL MANUFACTURING AND INDUSTRIAL ENGINEERING
December 14-16, 2019
MMIE provides a forum for accessing to the most up-to-date and authoritative knowledge from both industrial and academic worlds, sharing best practice in the field of Mechanical Manufacturing and Industrial Engineering. The meeting will provide an opportunity to highlight recent developments and to ...

Polymers for 3D Printing
POLYMERS FOR 3D PRINTING
December 11-12, 2019
3D printing is growing globally with increasingly customized materials being used to fulfill the expanding scope of applications. The technology is being utilized in the design, prototyping, and production of industrial and consumer goods, with diverse applications ranging from household appliances,...

SiriusDecisions 2019 Technology Exchange
SIRIUSDECISIONS 2019 TECHNOLOGY EXCHANGE
December 09-11, 2019
The drive for growth never ceases for b-to-b organizations, and more than ever technology is at the centre of enabling that progress. Gone are the days however when a disparate, disconnected set of platforms strewn across sales, marketing an product can serve the organization effectively. An aligned...

International Manufacturing, Machinery, Equipment, Materials and Services Exhibition
INTERNATIONAL MANUFACTURING, MACHINERY, EQUIPMENT, MATERIALS AND SERVICES EXHIBITION
December 04-07, 2019
Manufacturing Indonesia is the regions most established and successful Manufacturing machinery, equipment, materials and services and in this year’s edition will feature over 2,000 exhibitors including 28 country pavilions representing Germany, Japan, Korea, China, Singapore, Taiwan and Thaila...

Defense Manufacturing Conference
DEFENSE MANUFACTURING CONFERENCE
December 02-05, 2019
You are invited to attend the Defense Manufacturing Conference (DMC) scheduled for December 2-5, 2019 at the Phoenix Convention Center, Phoenix, Arizona. The DMC Conference will be conducted simultaneously with the Diminishing Manufacturing Sources and Material Shortages (DMSMS) Conference.

Diminishing Manufacturing Sources and Material Shortages
DIMINISHING MANUFACTURING SOURCES AND MATERIAL SHORTAGES
December 02-05, 2019
You are invited to attend the Diminishing Manufacturing Sources and Material Shortages 2019 Conference scheduled for December 2-5, 2019 in Phoenix, Arizona. You may also attend the concurrent Defense Manufacturing Conference at no additional expense by qualifying as active US Military, Government or...

Internet of Manufacturing
INTERNET OF MANUFACTURING
December 04-05, 2019
The Internet of Manufacturing provides the attendees with the know-how, skills and partners to successfully implement and monetize the latest in connected, digital and smart technologies, including edge computing, AI, connectivity, block chain, cloud, data analytics for customer insights, machine le...

Aerospace Additive Manufacturing Summit
AEROSPACE ADDITIVE MANUFACTURING SUMMIT
December 03-04, 2019
Looking for specialists in various phases of development, prototyping or additive manufacturing or companies wishing to acquire equipment software, machines in the aerospace & defense sectors and representatives of: Purchaising, Procurement, Research & Development, Supply Chain.

The Meeting Place for International Production
THE MEETING PLACE FOR INTERNATIONAL PRODUCTION
December 03-04, 2019
The meeting place for the creative screen industries on 3/4 December 2019 at the Business Design Centre London. Networking events, production solutions and more. A packed programme of keynotes, seminars, workshops and case studies, developed in partnership with leading industry bodies.

Europe
EUROPE'S PHARMA MANUFACTURING CONFERENCE
December 03-04, 2019
ManuPharma is firmly established as the only event to move beyond standard manufacturing practice and focus on how to exploit the opportunities of the future. Tackling both small molecule and biologics manufacturing challenges at a strategic level, it allows senior pharma manufacturing decision make...

Wells Fargo TMT Summit 2019
WELLS FARGO TMT SUMMIT 2019
December 02-04, 2019
This event is intended for clients of Wells Fargo and its subsidiaries (including Wells Fargo Securities, Wells Fargo Advisors, and Abbot Downing) who received this invitation directly from their Wells Fargo contact, or individuals expressly invited by a Wells Fargo Securities research analyst. Any ...

Additive Manufacturing for Medical Devices
ADDITIVE MANUFACTURING FOR MEDICAL DEVICES
December 03-04, 2019
Join us this December as over 80 medical device manufacturers gather for two days of facilitated collaboration aimed at addressing the regulatory and technical challenges surrounding 3D printing. By bringing together the industry to collaborate, share information, and work together, we aim to advanc...

International Exhibition on Metalworking & Welding Technology
INTERNATIONAL EXHIBITION ON METALWORKING & WELDING TECHNOLOGY
November 27-30, 2019
The 7th International Exhibition on Engineering Technology for Welding and Metal Processing in Vietnam - Metal & Weld 2018, taking place from November 28 - December 1, 2018 at (SECC) - 799 Avenue Nguyen Văn Linh, District 7, TP. Ho Chi Minh.

Metal Additive Manufacturing Conference 2019
METAL ADDITIVE MANUFACTURING CONFERENCE 2019
November 25-27, 2019
ASMET, the Austrian Society for Metallurgy and Materials, invites decision-makers, engineers, developers, industry experts, scientists and students to the fourth Metal Additive Manufacturing Conference with an exclusive focus on the processing of metals.

METALEX 2019
METALEX 2019
November 20-23, 2019
METALEX 2019 will open up a new world of smart metalworking technologies, many of which will make their debuts in ASEAN while many will be exhibited Only @ METALEX. This edition will put focuses on the following profiles amongst many other metalworking technologies and solutions: New technology for ...

International conference on industry 4.0 and smart manufacturing
INTERNATIONAL CONFERENCE ON INDUSTRY 4.0 AND SMART MANUFACTURING
November 20-22, 2019
Industry 4.0 is revolutionizing and revitalizing all the industrial operations. Companies are facing new challenges but also taking advantages from the multiple opportunities offered by the fourth industrial revolution. The conference provides a unique opportunity to meet scientists, researchers and...

3D Printing USA 2019
3D PRINTING USA 2019
November 20-21, 2019
The latest technological advances in 3D printers and markets will be presented. This is an exciting technological innovation that has undergone an explosion in interest in recent years. 3D Printing USA will cut through all the hype and present a measured but fast-paced view of the current and future...

Digital Manufacturing for Industry 4.0 Conference
DIGITAL MANUFACTURING FOR INDUSTRY 4.0 CONFERENCE
November 20-20, 2019
This free one-day event will focus on Industry 4.0 and its application to joining technologies and wider. With a focus on real industrial case studies, Industry 4.0 business tools and concepts, this event aims to create a greater awareness of the latest developments, associated opportunities and cha...

Digital Manufacturing Week 2019
DIGITAL MANUFACTURING WEEK 2019
November 12-15, 2019
Digital Manufacturing Week is a national festival of advanced manufacturing bringing together 6,000 manufacturing executives across dozens of events over four days in Liverpool. Created by The Manufacturer magazine, the UK’s largest industry title with 158,000-strong reader community, and a he...

Digital Operations: Manufacturing, Supply Chains and Transportation in a Digital Environment
DIGITAL OPERATIONS: MANUFACTURING, SUPPLY CHAINS AND TRANSPORTATION IN A DIGITAL ENVIRONMENT
November 13-14, 2019
A conference presented by the International Sales Committee, supported by the International Trade and Customs Law Committee, European Regional Forum and the Corporate Counsel Forum. Contract Management/challenges of complex systems focused contract landscape. Autonomous Transportation - intelligent ...

Global Manufacturing Conference
GLOBAL MANUFACTURING CONFERENCE
November 13-14, 2019
IFC Global Manufacturing Conference will be held in Marrakech, one of the busiest and most well-connected cities in Africa that serves as a major economic center and tourist destination. The conference will bring leading firms with a significant footprint in emerging markets together with government...

Diversity & Inclusion in Manufacturing Summit
DIVERSITY & INCLUSION IN MANUFACTURING SUMMIT
November 14-14, 2019
Manufacturers on the right side of history will be talking about increasing British industry’s share of the UK talent pool - by boosting participation from women and minority groups in the manufacturing workforce. Whether UK manufacturing has a problem with women and diversity - or whether it&...

FABTECH 2019
FABTECH 2019
November 11-14, 2019
FABTECH brings a wealth of innovation and technology solutions to Chicago November 11-14, 2019. More than 48,000 attendees and over 1,700 exhibiting companies are expected to gather once again to celebrate metal manufacturing at its best. The event also provides educational sessions and expert-led p...

MindShare Europe 2019
MINDSHARE EUROPE 2019
November 13-13, 2019
The B2B industry is consistently failing to capture hidden pockets of revenue and profit that can be uncovered today. Learn from industry experts on how to put an end to profit leakage for good. Zilliant MindShare welcomes you to our ecosystem of best-in-class partners and thought leaders.

AME International Conference
AME INTERNATIONAL CONFERENCE
November 04-07, 2019
The AME 2019 International Conference in Chicago is the largest lean conference in the world. With outstanding keynote speakers, daily practitioner presentations, must-see benchmarking tours, and pre-conference workshops, the learning experience are like no other. World-class, highly successful cont...

3D Metrology Conference 2019
3D METROLOGY CONFERENCE 2019
November 05-07, 2019
Expert presentations on the latest advances in research and application define 3DMC's unique technical profile. Exhibitors meet new customers from a diverse range of sectors and find the time to engage in in-depth discussions. 3DMC invites all participants to take part in high class evening even...

Digitalising Manufacturing Conference 2019
DIGITALISING MANUFACTURING CONFERENCE 2019
November 04-05, 2019
After a sell-out conference in 2018, we are delighted to announce the dates for Digitalising Manufacturing Conference 2019. Join us on the 4th & 5th November 2019 for our fifth annual conference, and gain the know-how you need from worldwide leading experts. The conference will address internati...

Digitalising Manufacturing 2019
DIGITALISING MANUFACTURING 2019
November 04-05, 2019
Over the last four years the Digitalising Manufacturing Conference has grown to become one of the key dates in the manufacturing calendar, with the emphasis evolving from technology through collaboration to people and the concept that digitalisation is not an end goal but a journey.

Symposium on Graphene and 3D Printing Technology
SYMPOSIUM ON GRAPHENE AND 3D PRINTING TECHNOLOGY
October 25-02, 2019
Graphene 2019 conference assures its attendees of a platform, perfect for the exchange and sharing of invaluable knowledge, research findings, and experiences that can happen with clarity as that of a crystal. Graphene & 3D printing in Technological innovation can be a great enabler for developm...

3D Printing and Polymer Materials Conference
3D PRINTING AND POLYMER MATERIALS CONFERENCE
October 31-01, 2019
Polymers, Processing, and 3D Printing. Learn about the latest in Polymer Materials and 3D-Printing methods. This Conference and workshop will focus on bringing new applications and industries into focus and knowledge-building in polymers and materials. A workshop will cover polymers, materials proce...

Polymers + 3D 2019
POLYMERS + 3D 2019
October 31-01, 2019
Polymers and Plastics are synonymous in many applications and everyday things. Yet they are two distinct terms when applied to the wide varied of properties that are associated with manufactured and engineered materials. This conference and workshop will focus on bridging the knowledge gap and appre...

2019 South Carolina Manufacturing Conference and Expo
2019 SOUTH CAROLINA MANUFACTURING CONFERENCE AND EXPO
October 29-30, 2019
Don’t miss the annual SC Manufacturing Conference and Expo, which has quickly become one of the largest manufacturing events in the Southeast. The most significant manufacturing event of the year will include: the Salute to Manufacturing Awards Luncheon, the Aerospace Luncheon, 2020 Auto, Aero...

Building Component Manufacturers Conference
BUILDING COMPONENT MANUFACTURERS CONFERENCE
October 22-25, 2019
SBCA's annual tradeshow is the perfect place for component manufacturers to learn about the latest ideas, innovations, and trends throughout their entire supply chain. BCMC includes a dynamic exhibit floor with machinery demonstrations, educational opportunities, and the chance to enjoy the cama...

Medical Design & Manufacturing Minneapolis
MEDICAL DESIGN & MANUFACTURING MINNEAPOLIS
October 23-24, 2019
Medical Design & Manufacturing Minneapolis connects you with top industry experts. But that’s true of other trade shows. What sets MD&M Minneapolis apart is that it’s actually five complementary events in one. The definitive event of the medtech industry, MD&M Minneapolis emp...

Design & Manufacturing Minneapolis
DESIGN & MANUFACTURING MINNEAPOLIS
October 23-24, 2019
Design & Manufacturing Minneapolis connects you with top industry experts. But that’s true of other trade shows. What sets Design & Manufacturing Minneapolis apart is that it's combined with four other complementary events. That means you have a chance to circulate outside your usu...

SOUTH-TEC 2019
SOUTH-TEC 2019
October 22-24, 2019
The Southeast manufacturing industry continues to grow; fueled by a combination of new technologies, a highly skilled workforce and R&D investments. SOUTH-TEC supports this thriving manufacturing market by providing the ideal forum for OEMs, tier suppliers and contract manufacturers to investiga...

10th American Manufacturing Strategies Summit
10TH AMERICAN MANUFACTURING STRATEGIES SUMMIT
October 21-22, 2019
The 10th American Manufacturing Strategies Summit brochure is now live - subjects covered this year include: How to achieve faster, more agile, flexible and responsive production, Engaging, developing and recruiting your workforce to avoid a skills gap, Cost reduction methods, Implementing new techn...

MTA Hanoi 2019
MTA HANOI 2019
October 16-18, 2019
The Precision Engineering, Machine Tools and Metalworking Event is officially coming back in 16-18/10/2019 at International Center for Exhibition (ICE), 91 Tran Hung Dao, Hanoi. MTA Hanoi is an effective platform for all manufacturing brands in the fields to present their innovations and meet the po...

Additive Manufacturing Conference
ADDITIVE MANUFACTURING CONFERENCE
October 17-18, 2019
Manufacturing concepts are rapidly changing and manufacturing processes are completely being redefined in the last decade. Industry 4.0, digitalization and IoT are at the core of next-generation manufacturing technologies. Additive Manufacturing, considered to be one of the cornerstones of next-gene...

Driving the Future of Sales Enablement
DRIVING THE FUTURE OF SALES ENABLEMENT
October 16-18, 2019
In this session you will be taken on a journey that includes the sharing of strategies and tactics that were used to establish critical relationships resulting in new levels of executive collaboration and engagement that transformed one Sales Enablement organization from a relatively unknown entity ...

TCT Shenzhen
TCT SHENZHEN
October 15-17, 2019
Welcome to TCT Shenzhen, one of the South China leading design-to-manufacturing events focused on additivemanufacturing, 3D printing, design and engineering technology. TCT Shenzhen has set the industryagenda, bringing together dozens of inspirational speakers, 100+ exhibiting companies and more tha...

SiriusDecisions Summit APAC
SIRIUSDECISIONS SUMMIT APAC
October 15-16, 2019
SiriusDecisions Summit APAC is the must attend event for our community of sales, marketing and product innovators and trendsetters that drive growth in the most well-respected high-performing companies in the market today. We will showcase our theme; Achieving High Performance by Aligning the B-to-B...

LEAP HR: Manufacturing
LEAP HR: MANUFACTURING
October 15-16, 2019
LEAP HR: Manufacturing brings together people leaders from across the manufacturing industry to challenge traditional thinking around how we: Solve a growing technical skills shortage, More effectively build ready-now leaders, Future-proof our talent – and ourselves.

3D-Printing in the Life Sciences
3D-PRINTING IN THE LIFE SCIENCES
October 14-15, 2019
SelectBIO presents 3D-Printing in the Life Sciences 2019, taking place October 14-15, 2019 on Coronado Island/San Diego, California. The interest around 3D-printing has risen spectacularly within the last few years. With continued progress, it has the potential to revolutionize the life sciences the...

SiriusDecisions Summit Europe
SIRIUSDECISIONS SUMMIT EUROPE
October 10-11, 2019
SiriusDecisions Summit Europe is the must attend event for our community of sales, marketing and product innovators and trendsetters that drive growth in the most well-respected high-performing companies in the market today. We will showcase our theme; Achieving High Performance by Aligning the B-to...

Conference on Composite Material Parts Manufacturing
CONFERENCE ON COMPOSITE MATERIAL PARTS MANUFACTURING
October 10-11, 2019
This conference offers a tremendous opportunity for experts spanning from academia to industry in the field of composite material parts manufacturing to present and discuss their findings on a very high level, stimulating and supporting the knowledge in this field.

MTA Myanmar
MTA MYANMAR
October 09-11, 2019
MTA Myanmar the largest manufacturing industry event in Myanmar returns for its 6th edition in Yangon in 2019. This show is part of the successful manufacturing technology series of exhibitions in Asia organised by UBM Asia.

Future of Manufacturing Summit 2019
FUTURE OF MANUFACTURING SUMMIT 2019
October 08-09, 2019
These are volatile times for manufacturers. Shifting geopolitical dynamics, increasing protectionism, changes in trade and tariff policies and the prospect of Brexit are injecting uncertainty and profoundly disrupting long-established manufacturing operations and integrated supply chains. Against th...

Advantage Through Excellence - Future of Manufacturing Conference
ADVANTAGE THROUGH EXCELLENCE - FUTURE OF MANUFACTURING CONFERENCE
October 08-08, 2019
The Advantage through Excellence conference provides you with the opportunity to develop new relationships by connecting and learning from and with the best. You will discover practical ways to apply creative solutions within your organization. Expand the depth and breadth of your knowledge in opera...

Northern Manufacturing and Electronics Show
NORTHERN MANUFACTURING AND ELECTRONICS SHOW
October 02-03, 2019
A must-attend event for anyone involved in design, engineering production and procurement – the place to see all the latest in production hardware, components, consumables and technology serving a wide range of industries including Aerospace/Defence, Automotive, Electronics Assembly/ Productio...

Canadian Manufacturing Technology Show
CANADIAN MANUFACTURING TECHNOLOGY SHOW
September 30-03, 2019
Experience more than 3,000,000 lbs of manufacturing equipment in action and connect with 700+ suppliers of technologies and solutions under one roof demonstrating life, working equipment. CMTS features the latest in Machine Tools, Tooling, Forming, and Fabricating technologies along with the cutting...

Defend Your Organization: Cybersecurity in Manufacturing Conference
DEFEND YOUR ORGANIZATION: CYBERSECURITY IN MANUFACTURING CONFERENCE
October 01-02, 2019
The manufacturing industry is one of the most heavily targeted industries for cyberattacks. As manufacturers undertake digital transformations, vulnerability to attacks increase. Join your manufacturing colleagues as we explore how manufacturers are preparing for a cyberthreat. In addition to hearin...

2019 Kansas Manufacturing Summit
2019 KANSAS MANUFACTURING SUMMIT
October 02-02, 2019
This event will bring together manufacturers, educators and community leaders to discuss common issues and to learn about industry innovations and the services and products Kansas companies offer. The conference agenda includes: Emerging (3D) Technologies, Automation & Additive Manufacturing, Su...

Asia Pacific Pharmaceutical Manufacturing Conference
ASIA PACIFIC PHARMACEUTICAL MANUFACTURING CONFERENCE
September 30-01, 2019
A conference is a multidisciplinary program with expansive cooperation with individuals from around the world concentrated on finding out about Pharma Research and its advances. This is your best chance to achieve the biggest gathering of members in our Pharma conference from the scholarly world, in...

Sustainable Manufacturing Conference
SUSTAINABLE MANUFACTURING CONFERENCE
September 30-01, 2019
Sustainable manufacturing is the creation of manufactured products through economically-sound processes that minimize negative environmental impacts while conserving energy and natural resources. Sustainable manufacturing also enhances employee, community and product safety.

Fabrication of Stainless Steel
FABRICATION OF STAINLESS STEEL
October 01-01, 2019
The British Stainless Steel Association is running an event on the fabrication of stainless steel in conjunction with Outokumpu and TWI. Imran Bhamji from TWI will be presenting on 'High temperature failure mechanisms in stainless steels.

Powder Metallurgy and Additive Manufacturing of Titanium
POWDER METALLURGY AND ADDITIVE MANUFACTURING OF TITANIUM
September 24-27, 2019
Global experts on powder metallurgy and additive manufacturing processing of titanium and titanium alloys will gather for academic exchange and technology transfer in Salt Lake City at the University of Utah for PMTi2019. After four successful conferences held in Australia, New Zealand, Germany, and...

Additive Manufacturing 101
ADDITIVE MANUFACTURING 101
September 26-26, 2019
FATHOM has designed a technology agnostic curriculum on the practical application of additive technologies to achieve greater results throughout the entire product development process and in to production. This established training program is now available as an accelerated 4-hour session.

WESTEC 2019
WESTEC 2019
September 24-26, 2019
Get the technology solutions you need with the most machining, metrology, design, waterjet, software, digital, 3D printing and engineering expertise than you can find anywhere! Experience hands-on interaction with the newest technologies while meeting face-to-face. Compare technology side-by-side so...

NG Manufacturing Summit 2019
NG MANUFACTURING SUMMIT 2019
September 23-25, 2019
Amongst others, the summit will look at key topics such as: Accelerating Digitisation in Manufacturing; Seamless connectivity and operational efficiency; and Automation driving a changing workforce. From case studies that lift the lid on operations inside best-in-class organisations, to workshops an...

EMO Hannover - 2019
EMO HANNOVER - 2019
September 16-21, 2019
There is an established tradition of young entrepreneurs presenting their new business models at EMO Hannover. Cell-Core, a company founded by Andreas Krüger and two of his colleagues at the end of 2016, is one of the exhibitors on the joint start-up stand supported by the Federal Ministry of E...

CEPE Annual Conference + General Assembly 2019
CEPE ANNUAL CONFERENCE + GENERAL ASSEMBLY 2019
September 18-20, 2019
Industrial manufacturing is in turmoil due to business pressures, market trends, and new technologies. This development has also left its mark on our industry. This year's CEPE Conference will address a range of issues that will impact on our industry, with a particular focus on the trends and h...

Tooling & Plastic Injection Molding 101
TOOLING & PLASTIC INJECTION MOLDING 101
September 19-19, 2019
FATHOM has created an accelerated injection molding 101 course-learn from industry experts and tour an active molding facility. Areas of focus during the event include design elements, tool construction, tool/part material options, regrind/recycle, and post operations.

3D Printing in Industrial and Medical Applications
3D PRINTING IN INDUSTRIAL AND MEDICAL APPLICATIONS
September 18-19, 2019
International conference for people and institutions interested in the development and implementation of additive manufacturing (AM, 3D Printing). The organizer's intention is to build a common platform for an exchange of knowledge and experience both in the field of industrial and medical solut...

Industry 4.0 Exchange
INDUSTRY 4.0 EXCHANGE
September 18-18, 2019
Industry 4.0 Exchange gathers together IT executives from across UK manufacturing to examine what impact the next generation of enterprise technology solutions will have on their manufacturing operations.

BeNeLux Additive Manufacturing Conference
BENELUX ADDITIVE MANUFACTURING CONFERENCE
September 18-18, 2019
Industry leaders will join forces to host Benelux’s first conference on additive manufacturing in one place. Grab the opportunity to capture all the potential of digital manufacturing to fuel your company’s growth and use their expert insights to stay ahead of the competition within your...

The Future MarTech Conference
THE FUTURE MARTECH CONFERENCE
September 16-18, 2019
The MarTech® Conference is coming to Boston September 16-18, 2019. And even though the event is less than a quarter-mile from our headquarters we didn’t see Conversational Marketing being showcased as a topic at the event. So we had an idea: what if we host an online event with some of our...

ManufacturED 2019
MANUFACTURED 2019
September 16-18, 2019
Building on the Manufacturers Alliance for Productivity and Innovation’s deep history and manufacturing roots, we have reimagined our premier event to inspire new thinking about your company’s challenges and goals. Located in a space that highlights the flexibility and agile nature neede...

Additive Manufacturing Meets Medicine
ADDITIVE MANUFACTURING MEETS MEDICINE
September 12-13, 2019
3D printing is of outstanding importance in medical engineering and has been growing continuously in recent years. From prostheses and soft implants to matrices for tissue engineering, additive manufacturing has decisive advantages for medicine. The scientific conference AMMM 2019 brings together en...

International Conference on Simulation for Additive Manufacturing
INTERNATIONAL CONFERENCE ON SIMULATION FOR ADDITIVE MANUFACTURING
September 11-13, 2019
Additive manufacturing (AM) is evolving as one of the most promising manufacturing technologies for creating solid structures of virtually any shape. Furthermore, AM allows to produce more complex shapes than those obtained through classical manufacturing techniques.

International Conference on Manufacturing Research
INTERNATIONAL CONFERENCE ON MANUFACTURING RESEARCH
September 10-12, 2019
The International Conference on Manufacturing Research will take place from 10 to 12 September 2019 at the Queen’s University Belfast, UK. It will include keynote presentations by internationally renowned researchers and industrialists, as well as papers from academia and industry, exploring a...

Liquid Metal Processing & Casting Conference
LIQUID METAL PROCESSING & CASTING CONFERENCE
September 08-11, 2019
The Liquid Metal Processing & Casting Conference is a forum for the exchange of research ideas in the fields of liquid metal casting, processing and remelting. This meeting will cover all of those topics, but will also include the addition of the topical area of liquid metal behavior in additive...

prefabAUS 2019
PREFABAUS 2019
September 10-11, 2019
95% of 2018 Conference attendees indicated they would attend the 2019 Conference! Being held in a world class venue. Connect with like-minded professionals with attendees coming from around the world! Visit exhibitors representing leading materials, technologies and prefab manufacturing processes. H...

SiriusDecisions Roadshow New York
SIRIUSDECISIONS ROADSHOW NEW YORK
September 10-10, 2019
The future of the b-to-b buyer experience: Account-based, digital and human. Marketing and sales have a new challenge in b-to-b: How to transform the power of technology into a compelling experience that’s online and automated but also personal and meaningful. Learn what high performing compan...

Redefine Indirect Procurement: Indirect Spend in Manufacturing Conference
REDEFINE INDIRECT PROCUREMENT: INDIRECT SPEND IN MANUFACTURING CONFERENCE
September 09-10, 2019
MAPI’s annual Indirect Spend in Manufacturing Conference is returning for its third installment! Join your fellow procurement colleagues as you discuss best practices, tools, and tips on how to achieve savings and optimize procurement of indirect categories. Key agenda topics will include: -Di...

Electronics Packaging Symposium
ELECTRONICS PACKAGING SYMPOSIUM
September 05-06, 2019
This symposium brings together leaders in academia, industry and government to discuss the current standing in the field of electronics packaging, and bring value from the varying viewpoints of each respective sector. There are many pressing challenges that are found within this field as of today, a...

CONTENT MARKETING WORLD CONFERENCE AND EXPO
CONTENT MARKETING WORLD CONFERENCE AND EXPO
September 03-06, 2019
Content Marketing World is the one event where you can learn and network with the best and the brightest in the content marketing industry. You will leave with all the materials you need to take a content marketing strategy back to your team – and – to implement a content marketing plan ...

Exhibition of master’s research in manufacturing
EXHIBITION OF MASTER’S RESEARCH IN MANUFACTURING
September 03-03, 2019
Cranfield University is hosting an end-of-year exhibition to showcase the research of over 150 students across a range of master’s courses. Please join us to experience first-hand the breadth and depth of research at Cranfield. With many projects sponsored and supported by external organisatio...

INA Welding 2019
INA WELDING 2019
August 28-30, 2019
The 6th edition of INAWELDING 2019 will be taking place from 28 – 30 August 2019 at JiExpo Kemayoran, Jakarta. The exhibition attracts a great number of specialists from companies carrying out operations at welding equipment, welding consumable, cutting, metallurgy, automotive industry, constr...

AI Manufacturing 2019
AI MANUFACTURING 2019
August 28-29, 2019
Artificial Intelligence and Machine Learning have ignited the fourth industrial revolution. Join manufacturing professionals from around the world at AI Manufacturing 2019, August 28-29 in Rosemont, Illinois, as we cut through the hype and provide in-depth examinations and case studies on how AI can...

WAN Summit Sydney
WAN SUMMIT SYDNEY
August 21-22, 2019
A vendor-neutral platform bringing together the enterprise and service provider communities to examine WAN market drivers and technologies with Summits already firmly established in London, New York, Singapore and Frankfurt hundreds of organizations have stimulated thousands of conversations and cat...

International Conference on Materials and Intelligent Manufacturing
INTERNATIONAL CONFERENCE ON MATERIALS AND INTELLIGENT MANUFACTURING
August 19-22, 2019
New material technology is one of the significant symbols of today's high-tech revolution. Most of the high-tech development is on the premise of the breakthrough of new materials technology. Material is the foundation of strategic emerging industries. It plays an important role in the high-tech...

International Conference on Mechanical, Manufacturing, Industrial and Civil Engineering
INTERNATIONAL CONFERENCE ON MECHANICAL, MANUFACTURING, INDUSTRIAL AND CIVIL ENGINEERING
August 20-20, 2019
The key intention of ICMMICE - 2019 is to provide opportunity for the global participants to share their ideas and experience in person with their peers expected to join from different parts on the world. In addition this gathering will help the delegates to establish research or business relations ...

International Conference on Industry 4.0 and Artificial Intelligence Technologies
INTERNATIONAL CONFERENCE ON INDUSTRY 4.0 AND ARTIFICIAL INTELLIGENCE TECHNOLOGIES
August 19-20, 2019
INAIT 2019 will offer oral, poster sessions, tutorials, and professional meetings. The program of the INAIT 2019 Conference intends to foster interaction so as to open the way to future cooperation between participants. All researchers and teams who develop research or recently became interested in ...

International Congress and Exhibition on Industrial and Manufacturing Engineering
INTERNATIONAL CONGRESS AND EXHIBITION ON INDUSTRIAL AND MANUFACTURING ENGINEERING
August 15-16, 2019
To promote quality research and real-world impact in an atmosphere of true international co-operation between scientists, engineers and industry by bringing together the world class renowned personalities to discuss the latest developments and innovations at one common platform. The Scientific Feder...

International Conference on Industrial Engineering and Intelligent Manufacturing
INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND INTELLIGENT MANUFACTURING
August 14-16, 2019
International Conference on Industrial Engineering and Intelligent Manufacturing aims to provide a forum for researchers, practitioners, and professinals from the industry, academia and universities to discourse on research and development, professional practice in industrial engineering and intelli...

Annual International Solid Freeform Fabrication Symposium
ANNUAL INTERNATIONAL SOLID FREEFORM FABRICATION SYMPOSIUM
August 12-14, 2019
The 30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference will be held in Austin TX on August 12-14, 2019. For more information, please see the Information tab. The event venue is the Hilton Austin Hotel. For more lodging information,please see the Lod...

B2B Sales & Marketing Exchange
B2B SALES & MARKETING EXCHANGE
August 12-13, 2019
The B2B Sales & Marketing Exchange brings together three complementary events — all specifically aligned with the top priorities of B2B revenue teams. Building on the success of the B2B Marketing Exchange in February, this new event brings together three of the industry’s premier pro...

International Conference on Design, Materials and Manufacturing
INTERNATIONAL CONFERENCE ON DESIGN, MATERIALS AND MANUFACTURING
August 09-12, 2019
Successfully held in Kuala Lumpur Malaysia, Beijing China, and Okinawa Japan in the past three years, ICDMM is an annual conference which explores the development and implications in the related fields of Design, Materials and Manufacturing with an objective to present the novel and fundamental adva...

International Conference on Manufacturing Science and Technology
INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND TECHNOLOGY
August 09-11, 2019
International Conference on Manufacturing Science and Technology is aimed at providing an excellent avenue for academicians, students, researchers, professionals, engineers, and scientists from academia and industry to share their research findings and building network for further collaborative rese...

EuroSciCon Conference on 3D Printing
EUROSCICON CONFERENCE ON 3D PRINTING
August 05-06, 2019
EuroSciCon Conference on 3D Printing 2019 with the theme Innovations that provide the cutting edge technology in 3D Printing is facilitated by EuroSciCon and it spotlights on most recent advancements being coordinated with the huge generation requests of examination and improvement. we tend to welco...

Connected Manufacturing Forum
CONNECTED MANUFACTURING FORUM
July 29-30, 2019
Connected Manufacturing Forum is a leading manufacturing conference that brings together 150+ Operations, Manufacturing, Advanced Engineering and Technology, executives, thought leaders and innovators for a collaborative debate on the latest Industry 4.0 trends, challenges and opportunities.

Manufacturing growth: Strategic Automation - Gaining an edge in Manufacturing with Robots
MANUFACTURING GROWTH: STRATEGIC AUTOMATION - GAINING AN EDGE IN MANUFACTURING WITH ROBOTS
July 23-23, 2019
For any manufacturer, issues like material handling, quality assurance, and workforce dependability can be a burden. Often, the best solution for these problems is to automate - but how does one even know where to start that process? Join our educational session as we discuss how different manufactu...

Workshop on Remanufacturing, Repair and Reuse
WORKSHOP ON REMANUFACTURING, REPAIR AND REUSE
July 22-22, 2019
Remanufacturing offers New York State industries a unique business opportunity to: Leverage existing technologies to improve your bottom line. Learn about new technologies that can benefit you. Share best practices. Explore funding opportunities and remanufacturing support.

International Manufacturing Machinery, Equipment, Materials and Services Exhibition
INTERNATIONAL MANUFACTURING MACHINERY, EQUIPMENT, MATERIALS AND SERVICES EXHIBITION
July 17-20, 2019
Manufacturing Surabaya 2019 will showcase a comprehensive range of exhibits, providing a focused and practical platform for the key industrial sectors in East Indonesia to visit. The perfect opportunity to demonstrate your products or just to interact with over 6,000 manufacturing industry professio...

Home Furnishings Manufacturing Solutions Expo
HOME FURNISHINGS MANUFACTURING SOLUTIONS EXPO
July 17-18, 2019
Home Furnishings Manufacturing Solutions Expo is a trade show that brings together suppliers offering the latest products, services, equipment, and innovative machinery, warehousing, technology, financial and logistics services, for the home furnishings manufacturing industry. The event also offers ...

International Conference on Design and Manufacturing Engineering
INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING ENGINEERING
July 15-17, 2019
The aim as well as objective of ICDME 2019 is to present the latest research and results of scientists related to Design and Manufacturing Engineering topics. This conference provides opportunities for the delegates to exchange new ideas face-to-face, to establish business or research relations as w...

The International Conference on Additive Manufacturing & 3D Printing
THE INTERNATIONAL CONFERENCE ON ADDITIVE MANUFACTURING & 3D PRINTING
July 09-11, 2019
Additive International is the premier summit for academic and industrial leaders in Additive Manufacturing and 3D Printing. Since 2006, we have showcased next-generation technology and the latest thinking, providing a forum for practitioners to build their networks and drive innovation.

MatComp 19
MATCOMP 19
July 03-05, 2019
MATCOMP, promoted by the Spanish Association of Composite Materials, is the most important event of the scientific, academic and business community around composite and high performance materials in Spain. The 2019 edition, organized jointly by AEMAC, the Automotive Technology Center of Galicia and ...

International Conference on Industry 4.0, Artificial Intelligence, and Communications technology
INTERNATIONAL CONFERENCE ON INDUSTRY 4.0, ARTIFICIAL INTELLIGENCE, AND COMMUNICATIONS TECHNOLOGY
July 01-03, 2019
The fourth Industrial Revolution is emerging and evolving at an exponential rather than a linear pace and disrupting almost every industry in every country. These changes signaling the transformation of entire systems of production, management, and governance. While many organizations might still be...

Asia-Pacific International Conference on Additive Manufacturing
ASIA-PACIFIC INTERNATIONAL CONFERENCE ON ADDITIVE MANUFACTURING
June 30-03, 2019
The 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM) is the first conference of this kind to be held in the Asia-Pacific region. The conference was created to provide an opportunity for industry professionals and thinkers to come together, share knowledge and engage in th...

Manufacturing Technology World
MANUFACTURING TECHNOLOGY WORLD
June 27-29, 2019
INDUSTRIAL HYDRAULICS, accumulators, actuators, clamps, conductors & connectors, fittings (adapters), feedback devices, gauges, heat exchangers, program sequencers, control (electronic) & software, filters, hydrostatic drives, industrial hydraulic safety products, plugs, power units, pumps, ...

Inside 3D Printing Seoul
INSIDE 3D PRINTING SEOUL
June 26-28, 2019
Ultimately, Inside 3D Printing will play a major role in helping 3D technology to be used in various industry sectors such as manufacturing, mold, construction, aerospace, medical, dental, jewelry and fashion, etc. You can expect special chemistry among entrepreneurs, investors, buyers, media and go...

International Conference on Flexible Automation and Intelligent Manufacturing
INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING
June 24-28, 2019
The School of Engineering at the University of Limerick is proud to host the 2019 International Conference in Flexible Automation and Intelligent Manufacturing (FAIM) in Limerick, Ireland, from June 24-28, 2019. Over the past number of weeks the FAIM Scientific Committee has formulated an agreement ...

Holistic Innovation in Additive Manufacturing
HOLISTIC INNOVATION IN ADDITIVE MANUFACTURING
June 26-27, 2019
The HI-AM Conference is the only academic conference in Canada focused exclusively on metal additive manufacturing. With over 100 additive manufacturing experts and decision-makers from academia, research institutes, industry and government participating, HI-AM 2019 is an event not to be missed.

Manufacturing growth: An Introduction to Cobots & How They Can Fill the Workforce Gap
MANUFACTURING GROWTH: AN INTRODUCTION TO COBOTS & HOW THEY CAN FILL THE WORKFORCE GAP
June 26-27, 2019
The hottest new technology in automation is the collaborative robot. So why are manufacturers everywhere flocking to his new product in a hurry? Come find out at our informative session on collaborative robots – or cobots for short.

3D Food Printing Conference
3D FOOD PRINTING CONFERENCE
June 27-27, 2019
3D printing technology will be fundamental to the way people interact with food in the future. Supermarkets are already testing to 3D print customized cakes, caterers/restaurants are offering printed desserts. Some even claim that there will be a 3D food printer in every home soon.

International Conference on Powder Metallurgy & Particulate Materials
INTERNATIONAL CONFERENCE ON POWDER METALLURGY & PARTICULATE MATERIALS
June 23-26, 2019
The leading North American technical conference on powder metallurgy and particulate materials, POWDERMET2019 is a hub for technology transfer for professionals from every part of the industry, including buyers and specifiers of metal powders, tooling and compacting presses, sintering furnaces, furn...

Conference: Metal 3D Printing
CONFERENCE: METAL 3D PRINTING
June 26-26, 2019
3D Printing in the Foundry Industry - The Optimal Alternative to Direct Metal Printing? On June 26, 2019, experts and decision-makers from the foundry industry and users and manufacturers of 3D printing systems will meet to talk about current trends and developments in a foundry and 3D printing topi...

AMPM 2019
AMPM 2019
June 23-25, 2019
Focusing on metal additive manufacturing, AMPM 2019 will feature worldwide industry experts presenting the latest technology developments in this fast-growing field. Driving more traffic and attracting Industry Professionals to the event-and your booth!

The High-Tech Manufacturing and Precision Engineering Expo
THE HIGH-TECH MANUFACTURING AND PRECISION ENGINEERING EXPO
June 25-25, 2019
The High-Tech Manufacturing and Precision Engineering Expo is taking place on the 25th June, 2019 at the Arena MK, Milton Keynes. This gathering of over 1000 senior management from the high tech manufacturing and precision engineering sector offers an opportunity for the sector to gather and keep up...

46th Annual Back to the 50’s Weekend
46TH ANNUAL BACK TO THE 50’S WEEKEND
June 21-23, 2019
With lots of color throughout the publication, this year’s informational 76-page guide is a keeper! You will find it filled with the Daily Schedule, all information related to the Event, Entertainment, interesting Articles, important contact information, and advertising from many of the vendor...

Manufacturing Expo 2019
MANUFACTURING EXPO 2019
June 19-22, 2019
New technologies are always evolving. New adjustments are always needed to achieve a more efficient manufacturing process. With Manufacturing Expo, over 85,000 industrialists in the manufacturing and supporting industries within ASEAN will meet with technology providers representing 2,400 brands of ...

International Conference on Geometric Modeling and Processing
INTERNATIONAL CONFERENCE ON GEOMETRIC MODELING AND PROCESSING
June 19-21, 2019
GMP is an annual international conference series on geometric modeling, simulation, and computing. The modeling and processing of geometric data is fundamental to many computer applications, including computer graphics, computer vision, CAD/CAM, medical imaging, engineering analysis, robotics, addit...

Predictive Analytics World for Industry 4.0
PREDICTIVE ANALYTICS WORLD FOR INDUSTRY 4.0
June 16-20, 2019
Predictive Analytics World for Industry 4.0 is the leading vendor-neutral conference for machine learning for smart manufacturing and IoT. Data scientists, industrial planners, and other machine learning experts will meet in Las Vegas on June 16-20, 2019 to explore the latest trends and technologies...

ISPE Biopharmaceutical Manufacturing Conference
ISPE BIOPHARMACEUTICAL MANUFACTURING CONFERENCE
June 18-20, 2019
The 2019 ISPE Biopharmaceutical Manufacturing Conference focuses on innovation in production methods and technologies that enable a competitive and sustainable biopharmaceutical product supply for the future. Have you adapted your organization and infrastructure to the challenges of new modalities c...

Manufacturing Innovation Summit
MANUFACTURING INNOVATION SUMMIT
June 19-19, 2019
The Manufacturing Innovation Summit is 90 manufacturing executives in a room. The only viable future for UK manufacturing is agile, high-margin and export-oriented - with people, processes, and systems focusing on fast-changing customer requirements and delivering transformational innovation.

The Manufacturing Science and Engineering Conference
THE MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE
June 10-14, 2019
The Manufacturing Engineering Division (MED) of ASME sponsors the Manufacturing Science and Engineering Conference (MSEC) every June. MSEC is the foremost annual forum for the scholarly exchange of advanced manufacturing research knowledge. It is intended to disseminate the most recent developments ...

Conference on Stochastic Models of Manufacturing and Service Operations
CONFERENCE ON STOCHASTIC MODELS OF MANUFACTURING AND SERVICE OPERATIONS
June 09-14, 2019
SMMSO 2019 is the twelfth in a row of successful conferences held every other year since 1997 in Europe. The conferences started in Greece (1997, 1999, 2001, 2003, and 2005) and moved to other countries (Netherlands, 2007, Italy, 2009, Turkey, 2011, and Germany, 2013) after returning to Greece in 20...

Manufacturing Science and Engineering Conference
MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE
June 10-14, 2019
The Manufacturing Engineering Division (MED) of ASME is pleased to sponsor the 2019 Manufacturing Science and Engineering Conference (MSEC 2019). The conference will be hosted by Pennsylvania State University, The Behrend College on June 10 - June 14, 2019, in Erie, Pennsylvania, USA.

52nd CIRP Conference on Manufacturing Systems
52ND CIRP CONFERENCE ON MANUFACTURING SYSTEMS
June 12-14, 2019
The scope of the 52nd CIRP CMS will be to review and discuss the advances, research results and industrial improvements in the field of manufacturing systems, which are facing significant and radical societal and technical changes.

Transforming Manufacturing Finance
TRANSFORMING MANUFACTURING FINANCE
June 13-14, 2019
Transforming Manufacturing Finance is back! In 2019, the event will focus on the development of the global market landscape, RPA 2.0, new advancements in blockchain, and other hot topics for manufacturers facing a substantial finance transformation. Another year of expert speakers, tailored breakout...

Western Manufacturing Technology Show (WMTS)
WESTERN MANUFACTURING TECHNOLOGY SHOW (WMTS)
June 12-14, 2019
For 30+ years, WMTS has served Western Canada's manufacturing community the latest in Machine Tools, Tooling, Metal Fabrication, Advanced Manufacturing and more! Meet manufacturers from oil & gas, industrial & commercial machinery, construction, mining, agriculture, wind energy, and aero...

Amerimold 2019
AMERIMOLD 2019
June 13-13, 2019
Amerimold is the Event for Mold Manufacturing. Introduced as the MoldMaking Expo in 1999, the annual tradeshow addresses the business development, best practices and networking interests of the plastic injection mold manufacturing industry. Amerimold is owned and operated by 4th-generation, family-o...

Orthopaedic Manufacturing & Technology Exposition and Conference
ORTHOPAEDIC MANUFACTURING & TECHNOLOGY EXPOSITION AND CONFERENCE
June 11-13, 2019
The world’s only conference exclusively serving the orthopedic industry whose mission is toEducate, Connect and EMpower the people who build orthopedic products. We're honored that 348 professionals from 87 unique device companies attended OMTEC 2018. In total, OMTEC gathered approximately...

Manufacturing Solutions Ireland
MANUFACTURING SOLUTIONS IRELAND
June 12-12, 2019
Since the company’s inception, Kx’s singular goal has been to provide its customers with the fastest, most efficient, and most flexible tools for processing real-time and historical data. This focus has enabled us to become the worldwide leader in high-volume, high-performance time-serie...

The Manufacturing Business Unit CFO Exchange
THE MANUFACTURING BUSINESS UNIT CFO EXCHANGE
June 12-12, 2019
In the era of digitalization, the role of the business unit CFO has taken on an entirely new meaning. Manufacturers are expecting a more transformative and strategic approach while still maintaining oversight on revenue. The Manufacturing Business Unit CFO Exchange was created as a direct response t...

Manufacturing Solutions 2019
MANUFACTURING SOLUTIONS 2019
June 12-12, 2019
Over 100 of the most advanced providers of metrology, inspection, machine tools, work holding, cutting tools, and Cad/Cam/PLM manufacturing software and ancillary products and services will be exhibiting. Bringing all the leading technology suppliers together the GTMA and LIT are providing an ideal ...

Inside 3D printing
INSIDE 3D PRINTING
June 10-11, 2019
The PRINTING INSIDE 3D offers exhibitors an exhibition programming and conferences in major cities of the world during the year. In the lectures of the congresses, taught by industry experts, participants will learn about 3D printing business applications and attend demonstrations of the latest in p...

Unlocking the Potential of 3D Printing and 3D Scanning
UNLOCKING THE POTENTIAL OF 3D PRINTING AND 3D SCANNING
June 11-11, 2019
Join us to learn how Additive Manufacturing and 3D Scanning are changing how things get made. You'll learn how you can improve your business processes with the next generation of 3D printing and 3D scanning. We'll discuss 3D printing applications, including metal 3D printing, along with the ...

Technical welding, fatigue design and metallurgy - Case studies and failure investigations
TECHNICAL WELDING, FATIGUE DESIGN AND METALLURGY - CASE STUDIES AND FAILURE INVESTIGATIONS
June 10-10, 2019
Dr Alan J McLeod presents information, case studies and failure analysis on the topics of welding, fatigue design and metallurgy. Alan has a wealth of knowledge and expertise in the field of welding and metallurgy, and experience in application to failure analysis, professional consulting, research,...

Innovations Technologies Machines Polska
INNOVATIONS TECHNOLOGIES MACHINES POLSKA
June 04-07, 2019
Towards Industry 4.0 – is the motto of the upcoming edition of the ITM Poland Fair Innovations-Technologies-Machines, which will be held in Poznań from 4 to 7 June 2019. ITM Poland is the leading trade fair in Central and Eastern Europe where the offer of Polish and global industry, whose prod...

International Congress on Welding, Additive Manufacturing and associated non-destructive testing
INTERNATIONAL CONGRESS ON WELDING, ADDITIVE MANUFACTURING AND ASSOCIATED NON-DESTRUCTIVE TESTING
June 05-07, 2019
The program is designed to allow interaction among attendees and to promote an active dialogue between academic researchers and industrial delegates in order to bridge the gap between academia and pressing industrial needs. As part of the program, world-renown scientists will be invited to present k...

The Conference for Additive Manufacturing in Austria
THE CONFERENCE FOR ADDITIVE MANUFACTURING IN AUSTRIA
June 06-07, 2019
The specialist conference ADDKON addresses itself to managing directors, production and production managers of the producing industry in the German-speaking area and offers the participants branch-specific know-how over the entire process chain. It shows the current technical possibilities as well a...

ADDIT3D 2019
ADDIT3D 2019
June 04-06, 2019
Additive manufacturing and 3D printing are increasingly being introduced into a wide range of sectors, as this type of technology provides responses to their manufacturing requirements as well as important benefits, such as time reduction, material savings and, above all, the customisation of produc...

Subcon 2019
SUBCON 2019
June 04-06, 2019
Subcon is firmly established as the must-attend event for subcontract manufacturing professionals across all industry sectors, looking to source suppliers, benchmark capabilities and secure the right partners to help them remain competitive in a global market. The best of British manufacturing will ...

International Exhibition on Used Machinery & Equipment
INTERNATIONAL EXHIBITION ON USED MACHINERY & EQUIPMENT
June 04-06, 2019
The 4th FITMAQ, International Fair of Bargain & Used Machinery, will take place from 6th to 8th June 2017, and it is the best place in Spain to exhibit second-hand machinery. It is organised jointly by Interempresas and Bilbao Exhibition Centre, and will be attended by the most important bargain...

Automotive 3D Printing Conference
AUTOMOTIVE 3D PRINTING CONFERENCE
June 05-05, 2019
3D Printing / Additive Manuafacturing has already started changing the automotive industry landscape. Many leading brands in the complete value chain exploit this technology now for different purposes. It will have a huge influence in making manufacturing more efficient, will improve the speed to ma...

Visualize the Future: Manufacturing Tech & Design Conference
VISUALIZE THE FUTURE: MANUFACTURING TECH & DESIGN CONFERENCE
June 04-05, 2019
Efficiency and cost savings are key components that drive investment in new technologies. Join your colleagues as we explore how manufacturers are using advanced manufacturing to create efficiencies within their organization. In addition to hearing from expert speakers, the conference will focus on ...

Boost Your Competitive Edge: Manufacturing SRM Conference
BOOST YOUR COMPETITIVE EDGE: MANUFACTURING SRM CONFERENCE
June 05-05, 2019
MAPI’s annual Manufacturing Supplier Relationship Management Conference is returning for its fifth installment. Rationalization and overall management of the supply chain is key to cost savings, risk reduction, and on-time delivery. Join your fellow purchasing executives as we take a close loo...

Composites 4.0
COMPOSITES 4.0
June 04-04, 2019
Industry 4.0 - the 4th industrial revolution - is a smart factory initiative that drives the use of cyber-physical systems, Internet of Things technologies, cloud based and cognitive computing to create virtual copies of the physical environment, intelligently monitor and control physical processes ...

Annual International SICOMP CONFERENCE on Manufacturing and Design of Composites
ANNUAL INTERNATIONAL SICOMP CONFERENCE ON MANUFACTURING AND DESIGN OF COMPOSITES
June 03-04, 2019
We are pleased to invite you to the 30th SICOMP Conference, which in 2019 also celebrates three decades of this annual composites event. Thanks to our close cooperation with GKN Aerospace Sweden, the conference will be held in Trollhattan. The conference venue is NOVA, located in the same area as In...

International Conference on Advanced Manufacturing and Materials
INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING AND MATERIALS
May 29-31, 2019
ICAMM 2019 is organized after ICAMM 2018 held in Tokyo, Japan during June 11-13, 2018. ICAMM 2017 held in The Hong Kong Polytechnic University, Hong Kong during June 25-27, 2017. ICAMM focuses on advanced manufacturing and materials research. The applications of advanced manufacturing and materials ...

International Conference Industry 4.0 in Practice
INTERNATIONAL CONFERENCE INDUSTRY 4.0 IN PRACTICE
May 29-29, 2019
Already for fifth year the leading organisations such as TalTech, Estonian Association of Information Technology and Telecommunications, Estonian Electronics Industries Association, Enterprise Estonia and numerous flagship technology companies join forces to promote the opportunities emerging from I...

Design to Manufacturing: Perfecting the Process
DESIGN TO MANUFACTURING: PERFECTING THE PROCESS
May 29-29, 2019
Join us for our Design to Manufacturing events to learn tips and tricks to improve your process, reduce costs, and save time. You'll leave this event with action items you can quickly implement. Design and validate for agility and strength, increase efficiency by applying intelligent machining s...

International Conference on Material Engineering and Manufacturing
INTERNATIONAL CONFERENCE ON MATERIAL ENGINEERING AND MANUFACTURING
May 25-27, 2019
The main aims to bring together leading academic scientists, researchers and research scholars to exchange and share their experiences and research results on all aspects of Materials Engineering and Manufacturing. It also provides a premier interdisciplinary platform for researchers, practitioners,...

RAPID + TCT
RAPID + TCT
May 20-23, 2019
Learn how to use 3D technologies to reduce time to market, produce stronger and lighter parts, improve efficiency, reduce waste, and create complex geometries. Consult with industry experts before you make equipment decisions.

National Manufacturing Debate 2019
NATIONAL MANUFACTURING DEBATE 2019
May 22-22, 2019
The National Manufacturing Debate is an annual event hosted by Cranfield University. The event brings together manufacturing professionals from a range of sectors to discuss and debate current challenges in the industry, and encourage networking and collaboration across the sector to enable continue...

International Digital Manufacturing Summit
INTERNATIONAL DIGITAL MANUFACTURING SUMMIT
May 20-22, 2019
The summit is aimed at bringing manufacturing leaders new insights, current and future trend of manufacturing industry. According to the survey of PWC, 91% of industrial companies are investing in creating digital factories in the heart of Europe. Digitalizing the production process is changing the ...

Integrating Digital Manufacturing
INTEGRATING DIGITAL MANUFACTURING
May 22-22, 2019
Additive Manufacturing and 3D Scanning are changing how things get made. However, these technologies are often overlooked as a critical part of the product development and manufacturing processes. Join us for this seminar as we explore the design freedom of additive manufacturing solutions throughou...

IMPACT Manufacturing Summit
IMPACT MANUFACTURING SUMMIT
May 19-21, 2019
This track was specifically developed to support manufacturing leaders with best strategies relating to planning and development, performance improvement and workforce management. Effective leadership strategies are usually considered the foundation of any successful operation and a key to building,...

International Conference on Nanomaterials, Materials and Manufacturing Engineering
INTERNATIONAL CONFERENCE ON NANOMATERIALS, MATERIALS AND MANUFACTURING ENGINEERING
May 17-19, 2019
ICNMM will bring together the top researchers from Asian Pacific nations, North America, Europe and around the world to exchange their research results and address open issues in biomaterials, biomedical manufacturing, casting and solidification, characterisation, coatings and surface engineering, c...

National Manufacturing Week 2019
NATIONAL MANUFACTURING WEEK 2019
May 14-17, 2019
National Manufacturing Week is Australia’s largest gathering of manufacturing decision-makers under one roof. It is the one place for the manufacturing community to come together to be inspired, innovate and connect with one another. National Manufacturing Week allows you to source the latest ...

Statistical Techniques for Medical Device Manufacturers
STATISTICAL TECHNIQUES FOR MEDICAL DEVICE MANUFACTURERS
May 16-17, 2019
The FDA's Quality System Regulation QSR requires device manufacturers to identify valid statistical techniques to establish, control, and verify the acceptability of process capability and product characteristics. Some manufacturers are not clear about what this means, while others employ statis...

EASTEC 2019
EASTEC 2019
May 14-16, 2019
EASTEC was held May 16-18, 2017 in West Springfield, Ma. Nearly 13,000 attendees from throughout New England and the U.S. came to explore the advanced manufacturing technologies and solutions they need to innovate and grow. The trade show spanned four exhibit buildings showcasing more than 500 exhib...

Manufacturing Finance Summit
MANUFACTURING FINANCE SUMMIT
May 15-15, 2019
Manufacturing Finance Summit is the UK’s largest gathering of manufacturing finance professionals - 80 growth-minded finance executives from across automotive, aerospace, defense, electronics, food and drink, and FMCG coming together to examine how the finance function is changing within UK ma...

Metal Additive Manufacturing Seminar
METAL ADDITIVE MANUFACTURING SEMINAR
May 13-15, 2019
Additive Manufacturing, is a process of joining materials to make objects from 3D model data, usually layer upon layer, as opposed to subtractive manufacturing methodologies. Metal AM includes a number of complementary powder-based technologies such as powder bed fusion or blown powder deposition. T...

International Conference on Design, Manufacturing and Automation
INTERNATIONAL CONFERENCE ON DESIGN, MANUFACTURING AND AUTOMATION
May 11-13, 2019
International Conference on Design, Manufacturing and Automation will take place from May 11-13, 2019, in Crowne Plaza Shanghai Fudan, Fudan University, Shanghai, China. This conference is organized by Science and Engineering Institute, technical supported by National Tsing-Hua University, Taiwan an...

4th Conference on 3D Printing in Medicine
4TH CONFERENCE ON 3D PRINTING IN MEDICINE
May 10-11, 2019
3D Printing has been applied in medicine since the 2000s. For manufacturing of custom prosthetics and dental implants, it was first used and then onwards the medical applications for 3D Printing has evolved significantly. By the use of 3D printing, we can produce exoskeletons, windpipes, jaw bone, b...

Keep Watch: The Manufacturing Security Conference
KEEP WATCH: THE MANUFACTURING SECURITY CONFERENCE
May 09-10, 2019
The need to protect your product and your people requires an ever-evolving strategy. The manufacturing industry faces an unprecedented number of security risks from securing its IP to protecting its employees from harm. Join your manufacturing colleagues as we explore how manufacturers are protectin...

National Additive Manufacturing Innovation Cluster Summit 2019
NATIONAL ADDITIVE MANUFACTURING INNOVATION CLUSTER SUMMIT 2019
May 06-10, 2019
Presenting a variety of activities and programmes with the NAMIC Conference anchoring the summit, this will be a unique experience for global 3D printing experts, adopters, innovators and professionals to interact for knowledge sharing and discussions on the latest 3D printing innovations, designs, ...

Advanced Semiconductor Manufacturing Conference
ADVANCED SEMICONDUCTOR MANUFACTURING CONFERENCE
May 06-09, 2019
ASMC is the leading international technical conference for discussing solutions that improve the collective manufacturing expertise of the semiconductor industry. Solving the challenges presented by semiconductor manufacturing has been a combined effort by device makers, equipment and materials supp...

Manufacturing Trade Show and Conference
MANUFACTURING TRADE SHOW AND CONFERENCE
May 08-08, 2019
The San Antonio Manufacturers Association (SAMA) is the voice of an advocate for the manufacturing industry in the greater San Antonio metropolitan area. SAMA is a membership driven organization dedicated to strengthening our local and regional manufacturing industry. Serving manufacturing for over ...

7th Annual Aerospace Manufacturing Conference
7TH ANNUAL AEROSPACE MANUFACTURING CONFERENCE
May 07-08, 2019
Delegates will gain a full understanding of the latest trends, challenges, and forecasts in the aerospace manufacturing industry, and be provided with insider knowledge and examples of products that can have a direct impact on their own operations and improve their productivity and profitability.

Austrian 3D Printing Forum
AUSTRIAN 3D PRINTING FORUM
May 07-08, 2019
Additive manufacturing is an innovative component in many industrial production chains, R & D and design. What potential is there in additive manufacturing in industrial applications and what new business models can develop as a result? Learn more about industrial applications, new technologies,...

3D Printing: Additive Manufacturing in the Automotive Industry
3D PRINTING: ADDITIVE MANUFACTURING IN THE AUTOMOTIVE INDUSTRY
May 07-08, 2019
What demands does the automotive industry have on additive manufacturing? What potential do experts already use in the area of ​​plastic, metal and hybrid components? High-caliber speakers report on their current experiences and challenges. Exclusive workshops and an entertaining speed dating for di...

AeroDef Manufacturing Conference
AERODEF MANUFACTURING CONFERENCE
April 29-02, 2019
AeroDef Manufacturing is an aerospace manufacturing and defense manufacturing conference and trade show for the aerospace and defense manufacturing industry. Produced by SME, in partnership with industry OEMs, our mission is to foster innovation across the extended enterprise to reduce costs, expedi...

Ceramics Expo - Ceramic additive manufacturing
CERAMICS EXPO - CERAMIC ADDITIVE MANUFACTURING
April 30-01, 2019
The Ceramics Expo Conference provides a one-of-a-kind opportunity to hear the latest advancements in ceramic materials, technologies, and manufacturing. Gain an in-depth view of the ceramic materials markets, the latest innovations and R&D for commercialization, manufacturing, and technological ...

Navigate the Options: The Benefits & Compensation in Manufacturing Conference
NAVIGATE THE OPTIONS: THE BENEFITS & COMPENSATION IN MANUFACTURING CONFERENCE
April 30-01, 2019
The Benefits & Compensation in Manufacturing Conference will provide an opportunity for manufacturing attendees to learn about the most pressing issues facing HR leaders today. In addition to hearing from distinguished expert speakers, the conference will focus on interactive discussions with pe...

Manufacturing, People & Tech Conference - Improving Productivity
MANUFACTURING, PEOPLE & TECH CONFERENCE - IMPROVING PRODUCTIVITY
April 30-30, 2019
Create High-Performing Cultures With Strategic Methods of Attracting, Developing & Engaging Talent & Applying The Latest Technologies & Industry 4.0 In Practice. A One-Day, Industry-Led Conference & Networking Event, 30th April 2019, Macdonald Burlington Hotel, Birmingham. Practical ...

International Conference on Material and Manufacturing Technology
INTERNATIONAL CONFERENCE ON MATERIAL AND MANUFACTURING TECHNOLOGY
April 26-28, 2019
With the past success, our objective of ICMMT is to provide a platform for researchers, engineers, academicians as well as industrial professionals from all over the world to present their research results and development activities in Material and Manufacturing Technology. This conference provides ...

International Conference on Computer and Digital Manufacturing
INTERNATIONAL CONFERENCE ON COMPUTER AND DIGITAL MANUFACTURING
April 26-28, 2019
The main objective of ICCDM 2019 is to provide a platform for researchers, engineers, experts, scholars as well as industrial professionals from all over the world to present their latest research results and development activities in computer and digital manufacturing. Moreover, this conference wil...

Smart Manufacturing Uprising
SMART MANUFACTURING UPRISING
April 22-24, 2019
This 3-day conference will showcase the world's best manufacturing practices, where current concerns and opportunities are not glossed over but structured to meet the demands of the industry and its entire ecosystem, highlighting smart factories, innovative operation strategies, best industry us...

Food Automation & Manufacturing Conference and Expo
FOOD AUTOMATION & MANUFACTURING CONFERENCE AND EXPO
April 14-17, 2019
Food Engineering's Food Automation & Manufacturing Conference and Expo (FA&M) is a 2 ½ day event that brings food and beverage processors and suppliers together to gain valuable information on the latest trends and technologies in manufacturing, automation, sustainability, and foo...

3D Design and Engineering Conference
3D DESIGN AND ENGINEERING CONFERENCE
April 16-16, 2019
Designers and engineers have grown up with milling and drilling as the manufacturing technologies for developing products. With 3D Printing/Additive manufacturing new opportunities arise but also new pitfalls. The 3D printing technology allows the designer to stay closer to the final product.

3D Printing Materials Conference
3D PRINTING MATERIALS CONFERENCE
April 16-16, 2019
3D printing is hot and has emerged as manufacturing technology with a thousand uses spread across a very diverse user base. The ongoing development of new materials does not only have an impact on the quality of the 3D printed end product, it opens new markets and it has a positive influence on the ...

4th International Conference on Advances in 3D Printing & Modelling
4TH INTERNATIONAL CONFERENCE ON ADVANCES IN 3D PRINTING & MODELLING
April 15-16, 2019
3D printing is any of various processes in which material is joined or solidified under computer control to create a three-dimensional object with the material being added together (such as liquid molecules or powder grains being fused together). 3D printing is used in both rapid prototyping and Add...

World Smart Manufacturing Summit
WORLD SMART MANUFACTURING SUMMIT
April 10-12, 2019
SMART MANUFACTURING combines various information, technologies, big data and computer controls to optimize the manufacturing process. Moving from traditional automation towards fully connected, integrated and flexible systems, smart factories nowadays improve their processes through self-optimizatio...

Industry 4.0 Summit & Expo
INDUSTRY 4.0 SUMMIT & EXPO
April 10-11, 2019
The Summit provides a great opportunity for manufacturers to hear from senior speakers from government, associations, and industry, plus see industry 4.0 case studies in action. The Expo showcases hundreds of innovations to help manufacturers digitize and upgrade operations.

Power Up Innovation: The CX & Product Management in Manufacturing Conference
POWER UP INNOVATION: THE CX & PRODUCT MANAGEMENT IN MANUFACTURING CONFERENCE
April 09-10, 2019
Power Up Innovation is about attention, collaboration and transformation — -Attention to customer data and needs -Collaboration between product managers and CX professionals -Transformation to customized, impactful user experiences Let’s talk about the new — touch points and person...

Orthomanufacture 2019
ORTHOMANUFACTURE 2019
April 09-10, 2019
This European event for implants and surgical instruments manufacturing technologies orthopedics, spine, traumatology, dental is made of an exhibition with about 40 exhibitors and, in the meantime, scientific and technical conferences. It will avoid you to meet, to echange, to discuss, to inform and...

International MES Conference: MES in times of data integration
INTERNATIONAL MES CONFERENCE: MES IN TIMES OF DATA INTEGRATION
April 04-05, 2019
In the age of integrated manufacturing, the role of manufac-turing execution systems at the heart of networked production cannot be over-emphasized. The MES Conference will focus on how leading companies engaged in discrete and process manufacturing employ these data-based solutions and provides dig...

Nordic3DExpo
NORDIC3DEXPO
April 03-04, 2019
The NORDIC3DEXPO exhibition, the Original Exhibition of 3D printing and 3D technologies, is the first exhibition of its kind in Scandinavia and Northern Europe to focus on 3D printing and 3D technologies. The exhibition began in spring 2016 when it took place for the first time at Energia Areena in ...

AMUG Conference 2019
AMUG CONFERENCE 2019
March 31-04, 2019
AMUG is a global community focused on accelerating the education and advancement of additive manufacturing and 3D Printing. Additive Manufacturing Users Group (AMUG) Conference brings together engineers, designers, managers, and educators from around the world to share expertise, best practices, cha...

Energize Your Data: Internal Audit Analytics in Manufacturing Conference
ENERGIZE YOUR DATA: INTERNAL AUDIT ANALYTICS IN MANUFACTURING CONFERENCE
April 02-03, 2019
Big data is transforming the manufacturing sector. The insights gained from data analytics allow internal audit executives to strengthen their cost and mitigation decisions, resulting in a strong ROI for the organization. Join your peers as we explore how manufacturers’ internal audit function...

Manufacturing & Technology 2019
MANUFACTURING & TECHNOLOGY 2019
April 01-03, 2019
The one-stop experience that brings together manufacturing decision makers, from design to delivery, and keeps them at the forefront of manufacturing’s digital transformation. We are the only event that educates manufacturing and engineering professionals on key trends: Smart Manufacturing/IIo...

5th Additive Manufacturing Symposium
5TH ADDITIVE MANUFACTURING SYMPOSIUM
April 02-02, 2019
Additive manufacturing is making successful inroads into an industry. On the basis of real-world industrial applications, solution providers will demonstrate the wide range of possible uses for and strengths of 3D printing for manufacturing. The Additive Manufacturing Symposium will provide examples...

Additive Manufacturing for Car Body Engineering 2019
ADDITIVE MANUFACTURING FOR CAR BODY ENGINEERING 2019
April 02-02, 2019
When conventional production technologies reach their limits, it is time for additive manufacturing to strike. Additive manufacturing promises faster product development and replacement, better parts properties and significant cost savings. The huge potential of additive manufacturing processes can ...

International Powder Metallurgy Exhibition & Conference
INTERNATIONAL POWDER METALLURGY EXHIBITION & CONFERENCE
March 25-27, 2019
Shanghai International Powder Metallurgy Exhibition & Conference short as PM CHINA was established in 2008 and has been successfully held to the twelfth session. After more than ten years of continuous cultivation, PM CHINA has now become one of the most influential professional exhibitions in t...

Powder Metallurgy for Additive Manufacturing
POWDER METALLURGY FOR ADDITIVE MANUFACTURING
March 25-27, 2019
Additive manufacturing, also termed 3D Printing, is a digital manufacturing process that uses 3D design data to build objects by depositing material, usually layer upon layer. Often referred to as the third industrial revolution, the advancement of AM technologies has brought a revolutionary change ...

Additive Manufacturing Accelerator Workshop Series
ADDITIVE MANUFACTURING ACCELERATOR WORKSHOP SERIES
March 26-27, 2019
The goal of our Additive Manufacturing (AM) Accelerators is that you leave with a new and deep understanding of how 3D printing can drive new value within your business, the tools and insight to begin driving 3D printing adoption across your organization and the confidence and resources to pitch to ...

The American Manufacturing Summit
THE AMERICAN MANUFACTURING SUMMIT
March 26-27, 2019
The Manufacturing Summit serves as an annual platform to exchange ideas around the impact of market dynamics and new technologies for current and future manufacturing, operations, and supply chain leaders. This year’s Summit creates an opportunity to examine key case studies around how workfor...

3rd International Conference on 3D Printing Technology and Innovations
3RD INTERNATIONAL CONFERENCE ON 3D PRINTING TECHNOLOGY AND INNOVATIONS
March 25-26, 2019
Printing technology has been evolved as an interim field science and has witness a huge market potential in establishing a new business module in the field of construction, designing, automobile engineering, architecture and more. With the advent of latest technologies being integrated with huge pro...

International Conference on Manufacturing, Material and Metallurgical Engineering
INTERNATIONAL CONFERENCE ON MANUFACTURING, MATERIAL AND METALLURGICAL ENGINEERING
March 22-25, 2019
The key goal of the conference is aimed at bringing together academicians, scientists, engineers, and researchers working in various disciplines of these fields to exchange views as well as to share their expertise, experience and research results, and discuss the challenges and future directions in...

Manufacturing in America 2019
MANUFACTURING IN AMERICA 2019
March 20-21, 2019
Siemens and Electro-Matic invite you to join over 3,200 manufacturing executives, engineers, and enthusiasts at Manufacturing in America 2019 inside Ford Field in downtown Detroit on March 20th and 21st. Learn about the newest technologies, share best practices and ideas, and be a part of advancing ...

Additive World Industrial 3D Printing Conference
ADDITIVE WORLD INDUSTRIAL 3D PRINTING CONFERENCE
March 20-21, 2019
Interest in Additive Manufacturing/3D printing for a broad range of industrial applications is growing rapidly. The advantages such as lightweight designs, optimized thermal performance, integration of parts and customization inspire a growing number of designers and engineers to use the freedom thi...

Advanced Manufacturing & Repair for Gas Turbines
ADVANCED MANUFACTURING & REPAIR FOR GAS TURBINES
March 19-20, 2019
Register today and be part of this unique interface event between the gas turbine industry, academia, and manufacturing & repair practitioners. Hosted by ASME’s Gas Turbine Segment and IGTI Division, this 2-day symposium, March 19 - 20, 2019 in Berlin will bring together engineers, designe...

Pharma Contract Manufacturing
PHARMA CONTRACT MANUFACTURING
March 19-20, 2019
Pharma Contract Manufacturing is Europe’s only conference that is entirely focused on building and maintaining effective relationships with your external manufacturers. Designed with the needs of the industries leading heads and directors of external manufacturing in mind, this forum will ensu...

Business Convention for Additive Manufacturing, 3D Printing, Rapid Prototyping and Product Development
BUSINESS CONVENTION FOR ADDITIVE MANUFACTURING, 3D PRINTING, RAPID PROTOTYPING AND PRODUCT DEVELOPMENT
March 19-20, 2019
The first and only business convention for 3D printing, additive manufacturing, rapid prototyping, and product development! With its unique concept based on pre-selected and pre-planned 40 minutes BtoB meetings, APS Meetings is the most efficient way for businesses to network and engage cooperation:...

The Global ManuChem Strategies
THE GLOBAL MANUCHEM STRATEGIES
March 18-19, 2019
It brings together over 150 production, SCM & engineering leaders who are responsible for process optimization, lean manufacturing and business strategy in their companies. Exchange your knowledge, share your insights and strengthen your capabilities in a unique interactive event format to be pr...

Additive Manufacturing Forum
ADDITIVE MANUFACTURING FORUM
March 14-15, 2019
The ADDITIVE MANUFACTURING FORUM offers the possibility to have discussions, to approach contacts and companies, to exchange ideas, to talk about problems. It’s a professional event where you can see what new technologies are available. Dr. Karl-Heinz Dusel is heading the Additive Manufacturin...

RapidPro 2019
RAPIDPRO 2019
March 13-14, 2019
Product development comes with specific challenges and choices. Which techniques are most suitable when your product concept goes into the prototyping phase and eventually, into production? Low-volume, rapid or on-demand production play an important role during this process.

NAACAM Show
NAACAM SHOW
March 12-14, 2019
A unified effort is required from all Sub-Saharan automotive stakeholders, including governments, to respond to the challenges and realize the opportunities facing local manufacturers. In the context of weak local new vehicle sales, an increase in the range and volumes of local manufactured componen...

Quality, OPEX & Manufacturing Innovations in Life Sciences Conference
QUALITY, OPEX & MANUFACTURING INNOVATIONS IN LIFE SCIENCES CONFERENCE
March 05-07, 2019
Discover drivers and challenges of embracing 4.0 in Pharma Production, Regulatory perspective on continuous manufacturing, Experience on handling the latest regulatory developments (GMP Annex 1, GMP for ATMPs, Data integrity, GDPR, Brexit, MRA between US and EU), Impact of mass serialization on qual...

AmCon Design & Contract Manufacturing Expo
AMCON DESIGN & CONTRACT MANUFACTURING EXPO
March 06-07, 2019
Your one-stop source for 3D Printing, Additive Manufacturing, Forming, Fabricating, Machining, Engineering, Prototyping, Finishing, Fasteners, Assembly, Electronic Manufacturing, Design, Castings, And More. Learn about the latest in cutting edge manufacturing technologies & innovations. See, tou...

Manufacturing Council Meeting Spring 2019
MANUFACTURING COUNCIL MEETING SPRING 2019
February 28-01, 2019
The MFG Council provides a vendor-free forum for senior executives to share best practices. Our semiannual meetings focus on roundtable dialogue among peers from leading manufacturers and an in-depth roundtable discussion around the front-burner issues of interest for manufacturing executives.

Additive Manufacturing for Aerospace & Space